CVE Severity Digest
The CVE Severity Digest turns the National Vulnerability Database feed into a prioritized security briefing. It groups affected software into practical product families, distinguishes patch and mitigation references from general citations, and ranks the vulnerabilities most likely to matter to technology operators while preserving direct links to the official record.
| CVE | Description | Published | Severity | CVSS | Priority score |
|---|---|---|---|---|---|
| CVE-2026-76850 | LMDeploy deserializes disaggregated-serving peer messages with pickle. The handle_zmq_recv coroutine in lmdeploy/pytorch/disagg/conn/engine_conn.py reads peer-to-peer cache-free requests with recv_pyobj(), which deserializes the received bytes with pickle.loads(), and the isinstance check against DistServeCacheFreeRequest runs only after deserialization has already completed. The peer that supplies those bytes is caller-controlled: p2p_connect passes remote_engine_endpoint_info.zmq_address from the request body to connect() on the ZMQ PULL socket, and the POST /distserve/p2p_initialize and /distserve/p2p_connect endpoints in lmdeploy/serve/openai/api_server.py apply no authentication unless the server is started with api_keys, which defaults to None. A remote attacker can direct an engine to pull from a ZMQ endpoint under their control and execute arbitrary code in the engine process. Deployments that do not enable disaggregated serving are not affected, because the receive loop is only started once the migration backend accepts the connection. | 08/19/2026 | CRITICAL | 9.3 | 95.852 |
| CVE-2026-49849 | xShop is an open-source shop developed in Laravel. An Unrestricted File Upload vulnerability in xShop version 3.0.3 allows an authenticated administrator to upload executable files (e.g., .php). By uploading a specially crafted php file, an attacker can achieve Remote Code Execution (RCE) on the server, leading to a full system compromise. Version 3.0.4 fixes the issue. | 08/21/2026 | CRITICAL | 9.1 | 95.252 |
| CVE-2026-16098 | The ProSolution WP Client plugin for WordPress is vulnerable to Arbitrary File Upload in all versions up to, and including, 2.0.10 via the proSol_handleFileUpload function. This is due to missing validation of the attacker-controlled Content-Disposition header filename, which overrides the allow-listed multipart filename before the file is saved, and a post-save extension check that fails to delete the already-written file. This makes it possible for unauthenticated attackers to upload files that may be executable, which makes remote code execution possible. The nonce required to reach the upload handler is publicly exposed via wp_localize_script on any front-end page rendering the job portal shortcode, allowing unauthenticated visitors to obtain a valid nonce and bypass that gating check entirely. | 08/16/2026 | CRITICAL | 9.8 | 89.394 |
| CVE-2026-18432 | The Frontend Admin by DynamiApps plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 3.29.9. The vulnerability exists because `ActionUser::conditions_logic()` gates the `current_user_can('edit_user', $user_id)` authorization check behind an `is_numeric()` test, causing the check to be skipped entirely when `$user_id` is a non-numeric string — a condition that can be induced by passing a crafted value such as `1one` through the unvalidated `item_id` parameter of the unauthenticated `wp_ajax_nopriv_frontend_admin/forms/change_form` AJAX endpoint. This makes it possible for attackers to escalate privileges to administrator by obtaining a server-signed `_acf_objects` payload carrying the non-numeric user ID, which WordPress subsequently coerces to integer 1 (the default administrator), allowing the attacker to overwrite that account's password or email address. Exploitation by unauthenticated users requires a public-facing frontend user form to be configured; in all other cases a subscriber-level account is sufficient. | 08/16/2026 | CRITICAL | 9.8 | 89.394 |
| CVE-2026-19598 | The Pods – Custom Content Types and Fields plugin for WordPress is vulnerable to Privilege Escalation via Authorization Bypass in all versions up to, and including, 3.3.9. The vulnerability exists because the pods_admin AJAX router funnels every access check — including the method allowlist, nonce verification, login enforcement, and capability gate — through pods_error(), which under the JSON meta-box-loader compatibility path only writes failures to the PHP error log and returns false instead of terminating the request, rendering all guards ineffective. This makes it possible for unauthenticated attackers to escalate their privileges to Administrator or overwrite the password of any user account, including the site owner's, enabling complete site takeover, or perform another administrator action. | 08/15/2026 | CRITICAL | 9.8 | 89.381 |
| CVE-2026-18316 | The Solace Extra plugin for WordPress is vulnerable to unauthorized modification and loss of data due to a missing capability check on the import_zip() function in versions up to, and including, 1.6.0. The handler is registered on both wp_ajax_action-import-zip and wp_ajax_nopriv_action-import-zip and only verifies the 'ajax-nonce' nonce, which is emitted on every admin page via wp_localize_script (unrestricted admin_enqueue_scripts hook) and is therefore accessible to any authenticated user including Subscribers. This makes it possible for authenticated attackers, with Subscriber-level access and above, to wipe navigation menus, sidebar widgets (via update_option('sidebars_widgets', array())), all theme mods (via remove_theme_mods()), and Elementor templates, as well as trigger arbitrary demo-content imports. | 08/16/2026 | CRITICAL | 9.1 | 87.3 |
| CVE-2026-14524 | The ProSolution WP Client plugin for WordPress is vulnerable to arbitrary file deletion due to insufficient file path validation in the proSol_fileDeleteProcess function in all versions up to, and including, 2.0.8. This makes it possible for unauthenticated attackers to delete arbitrary files on the server, which can easily lead to remote code execution when the right file is deleted (such as wp-config.php). An attacker must first call the proSol_fileUploadModalProcess handler to poison their own session with a path-traversal key, then call proSol_fileDeleteProcess with that key as the filename parameter; both steps require only the publicly exposed frontend nonce. | 08/16/2026 | CRITICAL | 9.1 | 87.294 |
| CVE-2026-18855 | The Link Library plugin for WordPress is vulnerable to arbitrary file deletion due to insufficient file path validation in the ll_delete_link_fields function in all versions up to, and including, 7.9.4 This makes it possible for unauthenticated attackers to delete arbitrary files on the server, which can easily lead to remote code execution when the right file is deleted (such as wp-config.php). Exploitation requires the administrator to have enabled the 'Delete local file on link deletion' plugin option (disabled by default) and to subsequently permanently delete the attacker-submitted link, which is a routine moderation action. | 08/15/2026 | CRITICAL | 9.1 | 87.287 |
| CVE-2026-19883 | The WPeMatico RSS Feed Fetcher plugin for WordPress is vulnerable to unauthorized modification of data that can lead to privilege escalation due to a missing capability check on the wpematico_import_settings function in all versions up to, and including, 2.8.24. This makes it possible for authenticated attackers, with subscriber-level access and above, to update arbitrary options on the WordPress site. This can be leveraged to update the default role for registration to administrator and enable user registration for attackers to gain administrative user access. | 08/22/2026 | HIGH | 8.8 | 82.382 |
| CVE-2026-48050 | Arc is an open, SQL-native time-series database for telemetry. Versions prior to 26.06.1 register Go's `net/http/pprof` handlers at `/debug/pprof/*` via `app.Use(pprof.New())` in `internal/api/server.go`, and `/debug/pprof` is added to `PublicPrefixes` in `cmd/arc/main.go`. The auth middleware short-circuits before the token check on prefix match, so the endpoints are reachable without any authentication. Version 26.06.1 contains a patch. Some workarounds are available. Block `/debug/pprof*` at a reverse proxy / load balancer in front of Arc, restrict Arc's API port to known-trusted networks via firewall rules, and/or patch the running build: comment out `app.Use(pprof.New())` in `internal/api/server.go` and rebuild. | 08/21/2026 | HIGH | 8.8 | 82.358 |
| CVE-2026-34741 | Combodo iTop is a web based IT service management tool. Prior to 3.2.3, authentication bypass allows unauthenticated remote attackers to execute arbitrary PHP files from the env-production directory on a new iTop instance in the production environment. This issue has been fixed in version 3.2.3. | 08/21/2026 | HIGH | 8.6 | 81.752 |
| CVE-2026-76832 | Agno's PythonTools in libs/agno/agno/tools/python.py contains a path traversal vulnerability that allows attackers to read, write, or execute arbitrary files by supplying parent-directory traversal sequences in the file_name argument passed to read_file, save_to_file, or run_python_file tool actions. Attackers can inject traversal sequences such as '../../../../../../etc/passwd' through direct tool invocation or via prompt injection embedded in agent-processed content to escape the intended base_dir boundary and achieve arbitrary file read, arbitrary file write, or arbitrary Python code execution within the process user's authority. | 08/19/2026 | HIGH | 8.5 | 81.452 |
| CVE-2026-34948 | Combodo iTop is a web based IT service management tool. Prior to 3.2.3, only classes present in the SELECT clause are protected by the silos access check in OQL. This issue has been fixed in version 3.2.3. | 08/21/2026 | HIGH | 7.7 | 79.058 |
| CVE-2026-47735 | Arc is an open, SQL-native time-series database for telemetry. Prior to version 26.06.1, Arc's user-SQL validator (`internal/api/query.go:ValidateSQLRequest`) blocked only `read_parquet(` and `arc_partition_agg(` via regex denylist. The broader DuckDB I/O function family — `read_csv_auto`, `read_csv`, `read_json`, `read_json_auto`, `read_text`, `read_blob`, `glob`, `parquet_metadata`, `parquet_schema`, `read_xlsx`, etc. — was not blocked. RBAC table-reference extraction inspected only `FROM`/`JOIN` clauses, so scalar table functions in the `SELECT` list slipped past both layers. This is fixed in 2026.06.1 via a structural sandbox at the DuckDB layer. After lockdown, DuckDB refuses to open any file outside the allowlist and refuses further `INSTALL`/`LOAD`. Already-loaded extensions remain callable. Some workarounds are available. Restrict API access to known-trusted networks via firewall rules or, as a temporary mitigation, add `read_csv*`/`read_json*`/`glob` etc. to `dangerousSQLPattern` in `internal/api/query.go`. | 08/21/2026 | HIGH | 7.1 | 77.258 |
| CVE-2026-14498 | The Query Wrangler plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 1.5.57 via the 'options' parameter parameter. This is due to missing capability check and nonce verification on the wp_ajax_qw_form_ajax handler, combined with unsanitized attacker-controlled options fully replacing saved query options and being passed directly to call_user_func_array() guarded only by function_exists(). This makes it possible for authenticated attackers, with subscriber-level access and above, to execute code on the server. Exploitation requires only that at least one query row exists in the database, as the query_id is a small enumerable integer with no further access control. | 08/16/2026 | HIGH | 8.8 | 74.394 |
| CVE-2026-16099 | The Podlove Podcast Publisher plugin for WordPress is vulnerable to arbitrary file deletion due to insufficient file path validation in the create_link_item function in all versions up to, and including, 4.5.3. This makes it possible for authenticated attackers, with contributor-level access and above, to delete arbitrary files on the server, which can easily lead to remote code execution when the right file is deleted (such as wp-config.php). A viable POP chain exists within the plugin itself via Podlove\ImageCache\GenerationGuard, whose __destruct() method invokes wp_delete_file() with an attacker-controlled file path populated through unserialization. | 08/16/2026 | HIGH | 8.8 | 74.394 |
| CVE-2026-17123 | The Royal Elementor Addons plugin for WordPress is vulnerable to Server-Side Request Forgery in versions up to, and including, 1.7.1064 via the Form Builder widget's 'webhook_url' setting. The widget's render() method persists the attacker-controlled URL into the wpr_webhook_url_{widget_id} option on every render (including a Contributor previewing their own draft), and the wpr_form_builder_webhook AJAX handler — registered for both authenticated and unauthenticated callers — reads that option and dispatches the outbound request via the non-safe wp_remote_post(), with no host allowlist, no scheme restriction, and no private/loopback IP filter (the plugin's existing wpr_is_blocked_remote_host / wpr_is_private_or_local_ip helpers are not called on this path). This makes it possible for authenticated attackers, with Contributor-level access and above, to make web requests to arbitrary locations originating from the web application and can be used to query and modify information from internal services. | 08/16/2026 | HIGH | 8.8 | 74.394 |
| CVE-2026-53527 | LeafWiki is a self-hosted wiki. Versions 0.1.0 through 0.10.0 have a privilege escalation vulnerability in the user update API. An authenticated user could update their own account role and escalate privileges from a regular user, such as `viewer`, to `admin`. Exploitation requires a valid authenticated LeafWiki user account. Instances without public registration and with only trusted users are at lower practical risk. Users should update to version 0.10.1 or greater. Until a patch is available, operators should restrict account creation and ensure that only trusted users have accounts on affected LeafWiki instances. If possible, access to the user update API should be restricted to trusted users or administrators only. | 08/21/2026 | HIGH | 8.8 | 74.352 |
| CVE-2026-53528 | LeafWiki is a self-hosted wiki. Versions 0.3.0 through 0.10.0 have a path traversal vulnerability in LeafWiki’s asset rename functionality. An authenticated user with editor permissions could move files that are accessible to the LeafWiki server process into a page’s asset directory. This could allow sensitive local files, such as the application database, to become downloadable as page assets. Users should update to version 0.10.1 or greater. As an additional mitigation, operators should ensure that the LeafWiki process runs with the least privileges necessary and does not have filesystem access to sensitive files outside the application’s required directories. Until a patch is applied, operators may reduce risk by restricting editor access to trusted users only and by limiting the filesystem permissions of the LeafWiki process. | 08/21/2026 | HIGH | 8.8 | 74.352 |
| CVE-2026-53530 | RaTeX is a KaTeX-compatible math rendering engine written in Rust. Prior to version 0.1.11, the public parser entrypoint `ratex_parser::parse(&str)` panics on the 9-byte input `\verbéxé` (i.e. `\verb` followed by the non-ASCII delimiter `é`). When handling a `\verb` command, the parser slices the verbatim argument with byte indices (`arg[1..arg.len() - 1]`); if the delimiter character is multibyte UTF-8, index `1` lands inside that character and Rust panics with *“byte index 1 is not a char boundary”*. Because RaTeX’s release profile sets `panic = "abort"` (`Cargo.toml:48`), the panic aborts the entire process — not just the current request/thread — making this a hard denial of service for any service that renders untrusted LaTeX. Version 0.1.11 fixes the issue. | 08/21/2026 | HIGH | 8.7 | 74.052 |
| CVE-2026-76878 | In OpenStack Aodh before 22.0.1, the alarm list API bypasses project scoping when the all_projects query parameter is set to false. The API checks for the presence of the all_projects key rather than its value; a true value enforces the administrator-only policy, but a false value removes the key and skips the branch that normally restricts results to the caller's project. A non-admin user with the reader role can list alarms from all projects, exposing alarm actions containing trust webhook URLs, Heat signal endpoints, project IDs, and user IDs. The parameter can also be combined with a foreign project_id to target a specific project's alarms. A related concern is that OpenStack Watcher does not apply authorization to its webhook trigger endpoint. Any authenticated user who learns an audit's webhook URL, for example from this leaked Aodh alarm metadata, can start an EVENT audit and its associated action plan regardless of their own project or role. The webhook endpoint has lacked policy enforcement since its introduction in the Ussuri release (Watcher 4.0.0). | 08/19/2026 | HIGH | 8.4 | 73.152 |
| CVE-2026-48105 | Arc is an open, SQL-native time-series database for telemetry. Prior to version 26.06.1, Arc Enterprise's Raft FSM (`internal/cluster/raft/fsm.go:applyRegisterFile`) accepts attacker-chosen file paths in manifest-registration proposals without validating them against the configured storage backend. The only check is that the path is non-empty. There is no parent-traversal (`..`) rejection, no allowlist of legitimate prefixes, no scheme restriction (`s3://` vs local), and no length bound. This is fixed in 2026.06.1. Some workarounds are available. Restrict cluster network access to known-trusted peers via strict firewall rules, audit the cluster manifest for unexpected paths (any path not matching the configured storage backend root is suspect), and/or disable cluster mode until the fix is available. | 08/21/2026 | HIGH | 8.3 | 72.858 |
| CVE-2026-48106 | Arc is an open, SQL-native time-series database for telemetry. Prior to version 26.06.1, Arc Enterprise's cluster replication receiver at `internal/cluster/replication/receiver.go` validates only the wire-format envelope (length, opcode) of inbound messages. The `MsgReplicateSync` payload itself is accepted without any application-layer authentication — no HMAC, no signature, no per-message nonce. The replication stream is protected at the transport layer by TLS / mTLS, but there is no protection against application-layer message tampering or replay once a peer is on the cluster network. This is fixed in 2026.06.1. Some workarounds are available. Restrict cluster network access to known-trusted peers via strict firewall rules, audit replication logs for unexpected `MsgReplicateSync` traffic, and/or disable cluster mode until the fix is available. | 08/21/2026 | HIGH | 8.3 | 72.858 |
| CVE-2026-19901 | A security flaw has been discovered in LB-LINK X-PRO 1.0.22-20231206. This affects an unknown function of the file /etc/config/easycwmp. The manipulation results in hard-coded credentials. It is possible to launch the attack remotely. Attacks of this nature are highly complex. The exploitability is reported as difficult. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. | 08/15/2026 | HIGH | 8.2 | 72.581 |
| CVE-2026-19900 | A vulnerability was identified in LB-LINK X-PRO 1.0.22-20231206. The impacted element is an unknown function of the file /etc/shadow. The manipulation leads to hard-coded credentials. It is possible to initiate the attack remotely. A high degree of complexity is needed for the attack. The exploitability is regarded as difficult. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. | 08/15/2026 | HIGH | 8.2 | 72.575 |
| CVE-2026-76886 | C12.22 protocol dissector crash in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of service | 08/19/2026 | HIGH | 8.1 | 72.258 |
| CVE-2026-18500 | @fastify/jwt is a JSON Web Token plugin for Fastify. In versions before 10.2.2, a per-request verification key passed to request.jwtVerify({ key }) is silently overridden by the plugin's globally configured secret, because the option merge applies the global key last. Applications that use different keys for different authorization domains, for example separate user and admin keys, therefore accept a token signed with the global key on a route that explicitly requires another key. This lets an ordinary authenticated user cross a key-based trust boundary without knowing either secret. The issue is fixed in @fastify/jwt 10.2.2, where an explicit per-call key takes precedence over the global secret. Users should upgrade to 10.2.2. | 08/15/2026 | HIGH | 8.1 | 72.258 |
| CVE-2026-19582 | In binutils 2.46.1 and prior versions, a victim who opens a crafted PE file using binutils could execute arbitrary code unknowningly via a stack buffer overflow out of bounds write. | 08/20/2026 | HIGH | 7.8 | 71.394 |
| CVE-2026-49360 | Recce is a data-validation toolkit for enhanced dbt (data build tool) PR review. Prior to version 1.50.0, OSS server deployments that expose the server to an untrusted network without authentication are vulnerable to unauthenticated SQL execution through the query run API. When Recce is configured with a DuckDB-backed project, an attacker can use DuckDB filesystem primitives to read and write files accessible to the Recce server process. The impact depends on how Recce is deployed, but may include disclosure of local files, tampering with Recce/dbt artifacts, modification of browser-served static files leading to stored XSS, and modification of application files if those paths are writable. If Recce is run as root, file access occurs with root privileges inside that host or container. This issue has been patched in Recce `v1.50.0`. Users should upgrade to Recce `v1.50.0` or later. The patch restricts unsafe file read/write behavior for DuckDB-backed query execution and hardens the affected query path. Other warehouse adapters have also been reviewed for similar exposure. Users who cannot upgrade immediately should avoid exposing `recce server` to the public internet or any untrusted network. Recommended mitigations include enabling authentication or placing Recce behind an authenticated reverse proxy/VPN, running Recce as a non-root user, using a read-only application filesystem where possible, and ensuring that sensitive files or credentials are not available to the Recce process. | 08/21/2026 | HIGH | 7.8 | 71.358 |
| CVE-2026-76956 | In libexpat 2.8.2 and 2.8.3 before 2.8.4, misinterpretation of getentropy's return code leads to insufficient entropy, which results in being vulnerable to hash flooding attacks, causing a denial of service via crafted XML content. | 08/20/2026 | HIGH | 7.5 | 70.494 |
| CVE-2026-76879 | C12.22 protocol dissector crash in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of service | 08/19/2026 | HIGH | 7.5 | 70.458 |
| CVE-2026-76880 | RRC protocol dissector crash in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of service | 08/19/2026 | HIGH | 7.5 | 70.458 |
| CVE-2026-76928 | X.509IF protocol dissector crash in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of service | 08/19/2026 | HIGH | 7.5 | 70.458 |
| CVE-2026-18549 | @fastify/multipart is a multipart form-data parser for Fastify. In versions from 5.3.0 up to but not including 10.1.1, when the busboy fileSize limit truncates a file part, the plugin clears its internal current-file reference while the underlying stream is still open. If the client then aborts the connection before sending the terminating boundary, the abort cleanup finds no stream to destroy, so saveRequestFiles() never settles, the request handler hangs, and the temporary file already written to disk is never cleaned up. An unauthenticated client can repeat this to permanently leak temporary files and suspended handler executions, leading to disk and event-loop exhaustion. The issue is fixed in @fastify/multipart 10.1.1. Users should upgrade to 10.1.1. | 08/15/2026 | HIGH | 7.5 | 70.458 |
| CVE-2026-19474 | @fastify/multipart is a multipart form-data parser for Fastify. In versions from 3.0.0 up to but not including 10.1.1, request.saveRequestFiles() can leave completed temporary files on disk when a client disconnects while the parser is advancing between multipart parts. The iterator rejection that occurs between parts falls outside the per-file cleanup path, so an earlier completed file is never removed. An unauthenticated client can repeat this to cause persistent, linear disk consumption, leading to denial of service. This is an incomplete-fix variant of CVE-2025-24033. The issue is fixed in @fastify/multipart 10.1.1. Users should upgrade to 10.1.1. | 08/15/2026 | HIGH | 7.5 | 70.458 |
| CVE-2026-53525 | WeeChat (Wee Enhanced Environment for Chat) is a free chat client. In versions 0.3.1 through 4.9.0, the WeeChat relay authentication uses non-constant-time string comparison functions (weechat_strcasecmp and strcmp) to verify password hashes and plaintext passwords. An attacker can exploit timing differences to extract the server-computed hash character by character, then authenticate using the correct hash without knowing the password. Version 4.9.1 fixes the issue. | 08/21/2026 | HIGH | 7.4 | 70.158 |
| CVE-2026-17581 | The WCPOS – Point of Sale (POS) plugin for WooCommerce plugin for WordPress is vulnerable to Code Injection via the 'thermal' Template Engine in all versions up to, and including, 1.9.14 due to the Receipt_Renderer_Factory dispatching templates with the 'thermal' engine to the Legacy_Php_Renderer instead of a safe thermal-specific renderer. This makes it possible for authenticated attackers, with Shop Manager-level access and above, to inject arbitrary PHP code into a template post that is subsequently written to a temporary file and executed via PHP's include(), resulting in remote code execution on the server. This requires the attacker to have Shop Manager-level access or above, as the template save path enforces a wcpos_template_settings nonce and the manage_woocommerce_pos capability check. | 08/16/2026 | HIGH | 7.2 | 69.6 |
| CVE-2026-15002 | The Platnosci Online Blue Media (Autopay) plugin for WordPress is vulnerable to Stored Cross-Site Scripting in versions up to, and including, 5.0.0 via the 'bm_woocommerce_css_editor_content' POST parameter. This is due to the Css_Editor::handle_save() method being wired to the WordPress 'init' hook by Settings_Manager::init_once() with no capability check, no nonce verification, and no sanitization on the input — the raw $_POST value is written to the 'woocommerce_bluemedia_settings' option via update_option(), then later echoed directly inside a <style> block on the WooCommerce checkout page by Css_Frontend::print_to_wp_head() with no output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page (the checkout page). | 08/16/2026 | HIGH | 7.2 | 69.594 |
| CVE-2026-53499 | FORT Validator is a Resource Public Key Infrastructure (RPKI) relying-party validator that produces validated route-origin data. FORT Validator versions through 1.6.7 contain an origin-validation error in their RRDP processing: a delegated CA under the same Trust Anchor Locator (TAL) can reference a victim CA’s public RRDP notification and snapshot URLs, causing FORT’s URL-based download cache to report success after deleting the victim’s local snapshot. Following a routine victim publication, this can silently remove the victim’s VRPs and other signed objects from FORT’s output, potentially enabling route hijacking or loss of reachability. Version 1.6.8 contains a patch that rejects cross-origin RRDP snapshot and delta URLs; as a workaround, administrators can disable HTTP/RRDP with --http.enabled=false while keeping rsync enabled, although this can leave data unavailable or stale where rsync is not supported. | 08/21/2026 | HIGH | 7.2 | 69.558 |
| CVE-2026-8619 | An unauthenticated denial-of-service vulnerability was identified in TP-Link TL-MR100 v3.2, TL-MR150 v3.2, TL-MR6400 v8.0 and Archer MR600 v2, due to improper handling of exceptional request conditions that may lead to a NULL pointer dereference. A remote attacker on an adjacent network can send a specially crated HTTP request to trigger a crash of the HTTP service process. Successful exploitation may cause the HTTP service to crash, making the web management interface and HTTP-dependent functionality temporarily unavailable. | 08/20/2026 | HIGH | 7.1 | 69.264 |
| CVE-2026-34836 | Combodo iTop is a web based IT service management tool. Prior to 3.2.3, improper access control in ajax.render.php and ajax.document.php allows for document access without checking on user permissions. This issue has been fixed in version 3.2.3. | 08/21/2026 | MEDIUM | 6.5 | 62.452 |
| CVE-2026-19906 | A weakness has been identified in pkp pkp-lib 3.3.0/3.4.0/3.5.0. This vulnerability affects the function setData of the file classes/user/form/APIProfileForm.php of the component API Key Generation. Executing a manipulation of the argument apiKey can lead to insufficient entropy. The attack may be performed from remote. This attack is characterized by high complexity. It is stated that the exploitability is difficult. This patch is called 529b5df878e571ccc727647f7748eafc1466b041. It is best practice to apply a patch to resolve this issue. | 08/15/2026 | MEDIUM | 6.3 | 61.887 |
| CVE-2026-43980 | Malla is a web analyzer for Meshtastic networks based on MQTT data. Prior to commit 4086e2b5f61615a813b70b25bc76095083552135, code names (long_name, short_name) received via MQTT are stored in SQLite without sanitization and rendered into the DOM without escaping. Any participant on a public Meshtastic MQTT broker can set a malicious node name that executes JavaScript in the browser of every Malla dashboard visitor. Commit 4086e2b5f61615a813b70b25bc76095083552135 fixes the issue. | 08/21/2026 | MEDIUM | 6.3 | 61.852 |
| CVE-2026-76795 | A vulnerability has been found in AeternaLabsHQ PullMD 3.2.0. This impacts an unknown function of the file /api of the component REST API Endpoint. The manipulation of the argument url leads to server-side request forgery. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 3.3.0 will fix this issue. The identifier of the patch is 96448894cc93ccecb0bdcbf263a9d25390a8455e. Upgrading the affected component is advised. | 08/20/2026 | MEDIUM | 5.5 | 59.47 |
| CVE-2026-53541 | OliveTin gives access to predefined shell commands from a web interface. The `filterToDefinedArgumentsOnly` function in the executor is intended to discard any arguments not explicitly defined in the action's configuration. However, prior to commit ebffd9f040f791208aee1db2e5a8aecd1e3e603d, a special case allows any argument whose name starts with `ot_` to bypass this filter. While two system arguments (`ot_executionTrackingId` and `ot_username`) are injected by OliveTin and overridden, all other `ot_`-prefixed arguments supplied by the user pass through unmodified. These bypassed arguments are not type-checked — the validation loop only iterates over the action's defined arguments, so `ot_`-prefixed arguments skip all type safety checks entirely; set as environment variables — via `buildEnv()`, with completely unvalidated values, and passed to the executed command; and included in the template context — available as `.Arguments.ot_*` in template rendering. Commit ebffd9f040f791208aee1db2e5a8aecd1e3e603d contains a patch. | 08/21/2026 | MEDIUM | 4.3 | 55.858 |
| CVE-2026-53531 | RaTeX is a KaTeX-compatible math rendering engine written in Rust. Prior to version 0.1.11, RaTeX’s recursive-descent parser recurses one (or more) native stack frame per nesting level at `{`, `\left`, `\sqrt{`, `^{`, etc, with no maximum depth limit. A short, ~10 KB input of nested groups overflows the 8 MB main-thread stack and aborts the process. With `panic = "abort"` (`Cargo.toml:48`), and because a Rust stack overflow is always a fatal `SIGABRT` regardless of panic strategy this is an unrecoverable, whole-process denial of service reachable from a single untrusted LaTeX string. Version 0.1.11 fixes the issue. | 08/21/2026 | MEDIUM | 6.9 | 55.652 |
| CVE-2026-10035 | The Turnkey bbPress by WeaverTheme plugin for WordPress is vulnerable to PHP Object Injection in all versions up to, and including, 1.7.1 via deserialization of untrusted input in the wvrbbp_set_to_serialized_values() function (reached through the wvrbbp_save_restore() settings-restore handler). The function reads the raw contents of an administrator-uploaded file and passes them directly to unserialize() without any validation. This makes it possible for authenticated attackers, with administrator-level access and above, to inject a PHP Object. No known POP chain is present in the vulnerable plugin itself; however, if a POP chain is present via an additional plugin or theme installed on the target system, it could allow the attacker to delete arbitrary files, retrieve sensitive data, or execute code. | 08/16/2026 | MEDIUM | 6.6 | 54.8 |
| CVE-2026-15056 | The StoreEngine — Complete eCommerce Solution with Memberships, Licensing, Affiliates & More plugin for WordPress is vulnerable to Directory Traversal in all versions up to, and including, 2.1.1 via the parse_file_path function. This makes it possible for authenticated attackers, with vendor-level access and above, to read the contents of arbitrary files on the server, which can contain sensitive information. | 08/16/2026 | MEDIUM | 6.5 | 54.5 |
| CVE-2026-13358 | The Appointment Booking Calendar — Simply Schedule Appointments Booking Plugin plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 1.6.12.10 via the ssa_past_appointments due to missing validation on a user controlled key. This makes it possible for authenticated attackers, with contributor-level access and above, to access appointment records belonging to arbitrary users and harvest the per-appointment ownership tokens (32-character hashes) embedded in the rendered HTML, which can then be used without any authentication to read or modify those appointments including full customer PII such as name, email, phone number, and private notes. The /wp-json/ssa/v1/render-shortcode REST endpoint is registered unconditionally on rest_api_init regardless of whether the Divi theme is installed, and its permission callback only requires current_user_can('edit_posts'), meaning any Contributor-level account is sufficient to trigger this entire exploit chain. | 08/16/2026 | MEDIUM | 6.5 | 54.494 |
| CVE-2026-15963 | The Quiz and Survey Master (QSM) – Easy Quiz and Survey Maker plugin for WordPress is vulnerable to generic SQL Injection via 'randon_category' Quiz Option in all versions up to, and including, 11.2.1 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with custom-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. | 08/16/2026 | MEDIUM | 6.5 | 54.494 |
| CVE-2026-16079 | The Fullscreen Galleria plugin for WordPress is vulnerable to generic SQL Injection via 'href' Attribute in Post Content in all versions up to, and including, 1.6.12 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with contributor-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. | 08/16/2026 | MEDIUM | 6.5 | 54.494 |
| CVE-2026-34949 | Combodo iTop is a web based IT service management tool.Prior to 3.2.3, an unauthenticated user could delete the .readonly file on iTop instances — a file created during the setup process that prevents users from performing write actions. This issue has been fixed in version 3.2.3. | 08/21/2026 | MEDIUM | 6.5 | 54.458 |
| CVE-2026-53524 | WeeChat (Wee Enhanced Environment for Chat) is a free chat client. In versions 4.3.0 through 4.9.0, the WeeChat relay module's WebSocket permessage-deflate decompression function relay_websocket_inflate() has no upper bound on output size. An authenticated relay user can send a small compressed WebSocket frame (~100 bytes) that decompresses to gigabytes, exhausting all server memory and crashing the entire WeeChat process. The api protocol enables permessage-deflate and requires authentication before WebSocket upgrade. Version 4.9.1 patches the issue. | 08/21/2026 | MEDIUM | 6.5 | 54.458 |
| CVE-2026-15604 | The Toocheke Companion plugin for WordPress is vulnerable to Stored Cross-Site Scripting in versions up to, and including, 2.10 via the 'series_bg_color' post meta field. This is due to insufficient input sanitization in the toocheke_series_bg_color_save() function (which stores the raw $_POST value in post meta) and insufficient output escaping in the series admin column rendering (where the stored value is concatenated into a style attribute without esc_attr()). This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user, such as an administrator, accesses the series list table in the admin dashboard. | 08/16/2026 | MEDIUM | 6.4 | 54.2 |
| CVE-2026-15790 | The Youtube Showcase plugin for WordPress is vulnerable to Stored Cross-Site Scripting in versions up to, and including, 4.0.4 via the 'emd_mb_meta' shortcode. This is due to insufficient input sanitization and output escaping on attachment titles referenced by the shortcode's image field: EMD_MB_Helper::image_info() returns the attachment's raw post_title, and EMD_MB_Helper::shortcode() interpolates it into title="%s" HTML attributes via sprintf() without esc_attr(). This makes it possible for authenticated attackers, with author-level access and above (upload_files capability required to create the attachment, edit_posts/publish_posts to embed the shortcode), to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 08/16/2026 | MEDIUM | 6.4 | 54.2 |
| CVE-2026-16758 | The Snippet Shortcodes plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Shortcode Attributes in all versions up to, and including, 5.2.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 08/16/2026 | MEDIUM | 6.4 | 54.2 |
| CVE-2026-16775 | The Smash Balloon Social Post Feed – Simple Social Feeds for WordPress plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'id' Shortcode Attribute in all versions up to, and including, 4.9.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 08/16/2026 | MEDIUM | 6.4 | 54.2 |
| CVE-2026-18402 | The SureDash – Community, Courses & Member Dashboard plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'draweropenverposition' Block/Shortcode Attribute in all versions up to, and including, 1.10.3 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The injected payload is stored inside the block-delimiter HTML comment's JSON, which wp_kses_post does not neutralize on save, and is only interpolated into the rendered style attribute at display time without esc_attr() escaping, allowing a double-quote to break out of the attribute and introduce arbitrary HTML event handlers. | 08/16/2026 | MEDIUM | 6.4 | 54.2 |
| CVE-2026-11780 | The Quiz and Survey Master (QSM) – Easy Quiz and Survey Maker plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'question_title' parameter in all versions up to, and including, 11.2.1 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 08/16/2026 | MEDIUM | 6.4 | 54.194 |
| CVE-2026-15066 | The Loco Translate plugin for WordPress is vulnerable to Stored Cross-Site Scripting via PO File Extracted Comments in all versions up to, and including, 2.8.7 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with translator-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 08/16/2026 | MEDIUM | 6.4 | 54.194 |
| CVE-2026-15726 | The Serious Slider plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'theme' Shortcode Attribute in all versions up to, and including, 1.4.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 08/16/2026 | MEDIUM | 6.4 | 54.194 |
| CVE-2026-15009 | The Advanced File Manager – Ultimate File Manager for WordPress And Document Library Solution plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'soundFile' parameter in all versions up to, and including, 5.4.12 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Exploitation requires the attacker to control a domain whose origin string is a leading prefix of the target site's backend URL (e.g. https://example.co against https://example.com), and the victim must be an authenticated WordPress administrator who visits the attacker-controlled page while the File Manager admin screen is open. | 08/16/2026 | MEDIUM | 6.1 | 53.294 |
| CVE-2026-53509 | CKAN MCP Server is a tool for querying CKAN open data portals. A known vulnerability CVE-2026-33060 indicated tools including ckan_package_search and sparql_query that accept a base_url parameter had the risk of making HTTP requests to arbitrary endpoints without restriction. A fix was applied to filter out ip addresses. However, a method to bypass exists prior to version 0.4.106. CKAN MCP Server validates caller-supplied CKAN server URLs by inspecting only the parsed hostname string before issuing outbound HTTP requests. In `src/utils/http.ts`, hostname aliases such as `ip6-localhost` are not equal to `localhost`, are not dotted IPv4 literals, and are not bracketed IPv6 literals, so they pass the SSRF filter but can resolve to loopback when the server performs the request. A remote MCP caller that can invoke CKAN tools with a `server_url` can therefore make the server connect to local or private addresses and, for CKAN-shaped responses, receive response-derived data. The updated fix in version 0.4.106 replaced the single `hostname === 'localhost'` check with a blocked-hostname `Set` covering `ip6-localhost` and `ip6-loopback`. | 08/21/2026 | MEDIUM | 5.7 | 52.052 |
| CVE-2026-19905 | A weakness has been identified in Jinher OA 1.0. Impacted is an unknown function of the file /C6/JHSoft.Web.HrmAttendance/attendance_out_approve.aspx. This manipulation of the argument httpOID causes sql injection. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. | 08/15/2026 | MEDIUM | 5.5 | 51.487 |
| CVE-2026-19903 | A vulnerability has been found in SourceCodester Online Clothing Store 1.0. This affects an unknown part of the file /db/shopping.sql of the component SQL Database Backup. The manipulation leads to files or directories accessible. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. | 08/15/2026 | MEDIUM | 5.5 | 51.481 |
| CVE-2026-76799 | A weakness has been identified in code-projects Login Registration System 1.0. This affects an unknown function of the file /loginsystem/database/login_registration_system.sql of the component SQL Database Backup Handler. This manipulation causes files or directories accessible. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks. | 08/20/2026 | MEDIUM | 5.5 | 51.476 |
| CVE-2026-19899 | A vulnerability was determined in SourceCodester Class and Exam Timetabling System 1.0. The affected element is an unknown function of the file /edit_teacher.php. Executing a manipulation of the argument ID can lead to sql injection. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. | 08/15/2026 | MEDIUM | 5.5 | 51.475 |
| CVE-2026-76783 | A security vulnerability has been detected in DeDeCMS 53_1_UTF8. This vulnerability affects unknown code of the file /plus/advancedsearch.php. Such manipulation of the argument sql leads to sql injection. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. | 08/20/2026 | MEDIUM | 5.5 | 51.47 |
| CVE-2022-4996 | A flaw has been found in mruby 3.1.0. Affected is the function udiv of the file bigint.c. Executing a manipulation can lead to floating point comparison with incorrect operator. It is possible to launch the attack remotely. The exploit has been published and may be used. It is best practice to apply a patch to resolve this issue. | 08/20/2026 | MEDIUM | 5.5 | 51.464 |
| CVE-2026-76762 | A vulnerability was detected in code-projects Assessment Management 1.0. The affected element is an unknown function of the file /welcome.php. The manipulation of the argument userid results in sql injection. The attack may be launched remotely. The exploit is now public and may be used. | 08/20/2026 | MEDIUM | 5.5 | 51.464 |
| CVE-2026-76764 | A flaw has been found in code-projects Employee Management System 1.0. The impacted element is an unknown function of the file /process/aprocess.php of the component Admin Login Endpoint. This manipulation of the argument mailuid causes sql injection. Remote exploitation of the attack is possible. The exploit has been published and may be used. | 08/20/2026 | MEDIUM | 5.5 | 51.464 |
| CVE-2026-76760 | A vulnerability was found in chenhg5 cc-connect up to 1.4.1. Affected by this vulnerability is the function Authenticate of the file core/webhook.go. The manipulation of the argument exec results in code injection. The attack may be performed from remote. The exploit has been made public and could be used. The reported GitHub issue was closed automatically due to inactivity. | 08/19/2026 | MEDIUM | 5.5 | 51.458 |
| CVE-2026-76761 | A vulnerability was identified in chenhg5 cc-connect up to 1.4.1. This affects the function shellExecCommand of the file core/engine.go of the component Management API. Such manipulation of the argument exec leads to os command injection. It is possible to launch the attack remotely. The exploit is publicly available and might be used. The reported GitHub issue was closed automatically due to inactivity. | 08/19/2026 | MEDIUM | 5.5 | 51.458 |
| CVE-2026-76917 | Bluetooth AVRCP Profile protocol dissector crash in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of service | 08/19/2026 | MEDIUM | 5.5 | 51.458 |
| CVE-2026-76918 | SSH protocol dissector crash in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of service | 08/19/2026 | MEDIUM | 5.5 | 51.458 |
| CVE-2026-76921 | CMS protocol dissector crash in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of service | 08/19/2026 | MEDIUM | 5.5 | 51.458 |
| CVE-2026-76922 | Bluetooth BR/EDR FHS protocol dissector crash in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of service | 08/19/2026 | MEDIUM | 5.5 | 51.458 |
| CVE-2026-76923 | Bluetooth HFP Profile protocol dissector crash in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of service | 08/19/2026 | MEDIUM | 5.5 | 51.458 |
| CVE-2026-76924 | Kerberos protocol dissector crash in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of service | 08/19/2026 | MEDIUM | 5.5 | 51.458 |
| CVE-2026-18385 | The The Paid Membership Plugin, Ecommerce, User Registration Form, Login Form, User Profile & Restrict Content – ProfilePress plugin for WordPress is vulnerable to arbitrary shortcode execution in all versions up to, and including, 4.16.19. This is due to the software allowing users to execute an action that does not properly validate a value before running do_shortcode. This makes it possible for authenticated attackers, with subscriber-level access and above, to execute arbitrary shortcodes. The partial mitigation introduced via strip_shortcodes() on [profile-first-name] and [profile-last-name] can be bypassed through the [profile-display-name format="first_last_names"] render path, the [profile-bio] render path (which re-fetches the raw description meta), and the double-bracket escape sequence [[tag]], all of which allow attacker-controlled shortcode text to reach the outer do_shortcode() call. | 08/16/2026 | MEDIUM | 5.4 | 51.194 |
| CVE-2026-15441 | The WC Product Table Lite plugin for WordPress is vulnerable to CSS Injection in versions up to, and including, 5.6.0 via the 'laptop_scroll_offset' shortcode attribute exposed through the unauthenticated wcpt_ajax() AJAX handler. The handler is registered for wp_ajax_nopriv_wcpt_ajax, JSON-decodes attacker-supplied attributes, only allowlists key names (not values), applies a preg_replace that strips only [ ] < >, and passes the value through do_shortcode into wcpt_style__sticky_sidebar(), where it is interpolated verbatim into inline CSS ('top: {$top}px;' and 'max-height: calc(100vh - {$top}px);') with no numeric casting or CSS escaping. This makes it possible for unauthenticated attackers to inject arbitrary CSS declarations and rules on pages rendering a product table with sticky sidebar enabled, which can be leveraged for data exfiltration (via attribute-selector + background-image URLs), UI redressing, and phishing that bypasses CSPs permitting inline styles. | 08/16/2026 | MEDIUM | 5.3 | 50.894 |
| CVE-2026-75027 | The Themify Builder plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 7.8.0. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for unauthenticated attackers to modify the stored Themify Builder styling data (padding and margin properties) of arbitrary posts, including private and draft posts, by supplying an attacker-controlled post ID and JSON styling payload. The nonce required by the handler is automatically emitted to all frontend pages rendered by the builder via wp_localize_script, meaning any unauthenticated visitor can trivially retrieve a valid nonce from page source and satisfy the only access control in place. | 08/22/2026 | MEDIUM | 5.3 | 50.888 |
| CVE-2026-76919 | ESS protocol dissector crash in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of service | 08/19/2026 | MEDIUM | 5.3 | 50.858 |
| CVE-2026-53497 | CrossWatch (CW) is a synchronization engine. Prior to version 0.9.21, GET /api/app-auth/status is accessible without authentication and returns the other_sessions array, which exposes metadata of all active sessions — including originating IP addresses, User-Agent strings, internal session IDs, and creation/expiry timestamps. Any unauthenticated network attacker can enumerate this data without credentials. Version 0.9.21 fixes the issue. | 08/21/2026 | MEDIUM | 5.3 | 50.852 |
| CVE-2026-15351 | The WC Vendors – WooCommerce Multivendor, WooCommerce Marketplace, Product Vendors plugin for WordPress is vulnerable to generic SQL Injection via the 'status' parameter in all versions up to, and including, 2.7.0 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with shop manager-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. The sanitize_text_field callback strips HTML but leaves SQL metacharacters intact, and wp_magic_quotes slash protection does not apply because WP_REST_Server::serve_request() calls wp_unslash() on GET parameters before the sanitize callback executes. | 08/16/2026 | MEDIUM | 4.9 | 49.7 |
| CVE-2026-17582 | The Slider Hero plugin for WordPress is vulnerable to second-order SQL Injection in versions up to, and including, 9.1.7 via the qcld_sliderhero_duplicate() function. Slide data (description, title, btn, btn2, image_link, custom, etc.) is stored safely via $wpdb->update() with %s placeholders in the qchero_save_image AJAX handler, but when an administrator triggers the 'heroduplicateslider' task, qcld_sliderhero_duplicate() re-reads every slide column and concatenates the raw values directly into an INSERT VALUES tuple that is then executed with $wpdb->query() — with no $wpdb->prepare(), esc_sql(), or _real_escape_string in between. This makes it possible for authenticated attackers, with administrator-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. | 08/16/2026 | MEDIUM | 4.9 | 49.7 |
| CVE-2026-2283 | The User Login History plugin for WordPress is vulnerable to SQL Injection via the 'blog_id' parameter in all versions up to, and including, 2.1.7. This is due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with Administrator-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. This is only exploitable on multisite installations. | 08/16/2026 | MEDIUM | 4.9 | 49.7 |
| CVE-2026-76957 | libexpat before 2.8.4 lacks handler call depth tracking with custom encoding callbacks. Thus, a use-after-free can occur. NOTE: this is similar to CVE-2026-50219, CVE-2026-56131 and CVE-2026-56412. | 08/20/2026 | MEDIUM | 4.9 | 49.694 |
| CVE-2026-15602 | The NEX-Forms – Ultimate Forms Plugin for WordPress plugin for WordPress is vulnerable to generic SQL Injection via the 'additional_params' parameter in all versions up to, and including, 9.2.4 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with admin-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. This is a second-order vulnerability; the payload is stored via the submission_report2 AJAX handler (which lacks a nonce check and relies solely on a capability that can be configured down to subscriber-level) and triggered when a CSV export is generated. | 08/16/2026 | MEDIUM | 4.9 | 49.694 |
| CVE-2026-53529 | LeafWiki is a self-hosted wiki. Prior to version 0.10.2, page titles returned by the search API could be rendered as raw HTML in the frontend. A user with editor or administrator permissions could create or modify a page title containing an HTML/JavaScript payload. When another user searched for a matching term, the payload could execute in the victim’s browser. The impact depends on deployment configuration. With `--public-access` enabled, unauthenticated visitors could be affected. In authenticated-only deployments, the issue could be used for cross-user XSS against logged-in users who can access search results. The issue has been fixed in version 0.10.2 by ensuring that author-controlled page titles in search results are not interpreted as raw HTML by the browser while preserving search result highlighting. | 08/21/2026 | MEDIUM | 4.8 | 49.352 |
| CVE-2026-76881 | CMS protocol dissector crash in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of service | 08/19/2026 | MEDIUM | 4.7 | 49.058 |
| CVE-2026-76882 | Bluetooth Attribute Protocol dissector crash in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of service | 08/19/2026 | MEDIUM | 4.7 | 49.058 |
| CVE-2026-76883 | Catapult DCT2000 file parser crash in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of service | 08/19/2026 | MEDIUM | 4.7 | 49.058 |
| CVE-2026-76889 | UMTS FP protocol dissector crash in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of service | 08/19/2026 | MEDIUM | 4.7 | 49.058 |
| CVE-2026-76920 | 3gpp phone log file parser crash in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of service | 08/19/2026 | MEDIUM | 4.7 | 49.058 |
| CVE-2026-76927 | H.245 protocol dissector crash in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of service | 08/19/2026 | MEDIUM | 4.7 | 49.058 |
| CVE-2026-76929 | Pcapng file parser crash in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of service | 08/19/2026 | MEDIUM | 4.7 | 49.058 |
| CVE-2026-53468 | Typemill is a flat-file, Markdown-based content management system designed for informational documentation websites. Versions prior to 2.23.0 are vulnerable to stored HTML attribute injection in the page metadata fields (`og:title` and `og:description`). An authenticated user with permission to modify page metadata can inject arbitrary HTML attributes into generated `<meta>` tags due to missing output encoding. Under certain browser or DOM interaction scenarios, this may lead to stored cross-site scripting (XSS). Version 2.23.0 fixes the issue. | 08/21/2026 | MEDIUM | 4.6 | 48.752 |
| CVE-2026-12477 | The Gravity Booster – Styles & Layouts for Gravity Forms plugin for WordPress is vulnerable to Stored Cross-Site Scripting via admin settings in all versions up to, and including, 5.26 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with editor-level permissions and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This only affects multi-site installations and installations where unfiltered_html has been disabled. | 08/16/2026 | MEDIUM | 4.4 | 48.194 |
| CVE-2026-15345 | The ShortPixel Adaptive Images – WebP, AVIF, CDN, Image Optimization plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 3.11.5. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with subscriber-level access and above, to modify configuration options of third-party plugins including ShortPixel Image Optimizer, Autoptimize, WP Rocket, Imagify, and LiteSpeed Cache, as well as the plugin's own API key and account binding. Exploitation requires the respective third-party plugins to be installed, as the impact against those plugins' settings is only reachable when those plugins are present. | 08/16/2026 | MEDIUM | 4.3 | 47.9 |
| CVE-2026-12905 | The Bookly plugin for WordPress is vulnerable to Insecure Direct Object Reference in versions up to, and including, 27.7 via the appointment() method of the Mobile Staff Cabinet API (resource=appointment, action=bookly_mobile_staff_cabinet) in frontend/modules/mobile_staff_cabinet/api/handlers/Handler1_0.php. This is due to the handler loading an Appointment by the attacker-supplied params[id] without verifying that the appointment's staff_id matches the authenticated staff member, whereas sibling operations (deleteAppointment, saveAppointment, appointments list) correctly scope to $this->staff->getId() when $this->role === ROLE_STAFF. This makes it possible for authenticated attackers, with staff-level mobile cabinet access (any valid access_key token bound to a Staff entity), to read appointment details — including the internal note and the full customer_appointments collection (customer full_name, email, phone, notes, custom_fields, extras, payment_total, payment_type, payment_status) — belonging to other staff members by enumerating sequential appointment IDs. | 08/16/2026 | MEDIUM | 4.3 | 47.894 |
| CVE-2026-13167 | The Everest Forms – Contact Form, Payment Form, Quiz, Survey & Custom Form Builder with AI plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 3.5.2. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with delegated form management access and above, to activate arbitrary already-installed WordPress plugins — including previously deactivated or vulnerable plugins — without holding the core activate_plugins capability. Exploitation requires the target user to hold a delegated Everest Forms capability (manage_everest_forms, everest_forms_create_forms, or everest_forms_view_forms), which the plugin's own roles and permissions tool allows administrators to assign to non-administrator roles such as Author; the nonces required to exploit the AJAX handlers are emitted on EVF admin pages accessible to any such delegated user. | 08/16/2026 | MEDIUM | 4.3 | 47.894 |
| CVE-2026-16779 | The Kubio AI Page Builder plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 2.8.5. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with contributor-level access and above, to overwrite front-page configuration options (show_on_front, page_on_front, and page_for_posts), rewrite primary navigation menu items, replace template parts, and overwrite the Kubio global-data post. Although a nonce check via check_ajax_referer() is present, the nonce is unconditionally emitted into window.kubioUtilsData for every user who can load the block editor, making it harvestable by any Contributor and therefore an ineffective authorization barrier. | 08/16/2026 | MEDIUM | 4.3 | 47.894 |
| CVE-2026-76057 | The AutomatorWP – Automator plugin for no-code automations, webhooks & custom integrations in WordPress plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 5.8.4. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with subscriber-level access and above, to retrieve all ConvertKit form data configured by the site's manager account, exposing integration details intended to be restricted to plugin managers. The required nonce is localized on every admin page load, making it accessible to any authenticated user who can reach /wp-admin. | 08/22/2026 | MEDIUM | 4.3 | 47.888 |
| CVE-2026-76074 | The AutomatorWP – Automator plugin for no-code automations, webhooks & custom integrations in WordPress plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 5.8.4. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with subscriber-level access and above, to retrieve the site's configured Campaign Monitor mailing list catalog, including all list IDs and names, that should be restricted to users with the plugin's manager capability. The required nonce is emitted unconditionally on every WordPress admin page via wp_localize_script, meaning any subscriber visiting /wp-admin/profile.php can obtain it without any elevated access. | 08/22/2026 | MEDIUM | 4.3 | 47.888 |
| CVE-2026-53487 | Kite is a Kubernetes dashboard. Prior to version 0.12.3, authenticated Kite users with any role can request `/api/v1/overview` for a cluster that their roles do not permit by selecting that cluster with `x-cluster-name`. The overview route is registered before `middleware.RBACMiddleware()` and `GetOverview` only checks `len(user.Roles) > 0`, so it returns aggregate Kubernetes inventory and capacity data from unauthorized clusters. Version 0.12.3 fixes the issue. | 08/21/2026 | MEDIUM | 4.3 | 47.852 |
| CVE-2026-18165 | @fastify/oauth2 is an OAuth 2.0 plugin for Fastify. In versions from 7.2.0 up to but not including 8.3.0, the plugin validates the OAuth state, and with PKCE the code verifier, by comparing the callback query parameter against an unprefixed, predictable cookie, with no server-side binding to the browser that began the flow. Any party able to write a cookie for the application's host, such as a sibling subdomain under the same registrable domain, can plant matching state and verifier cookies and complete an attacker-owned OAuth flow inside a victim's browser, silently signing the victim in to the attacker's account (login CSRF). It does not expose the victim's own account, credentials, or tokens. The issue is fixed in @fastify/oauth2 8.3.0, which adds an opt-in hostPrefixedCookies option. Users should upgrade to 8.3.0 and enable it, or bind state to a server-side session. | 08/15/2026 | MEDIUM | 4.2 | 47.558 |
| CVE-2026-33333 | Combodo iTop is a web based IT service management tool. Prior to 3.2.3, there is sensitive information disclosure in the error messages. This issue has been fixed in version 3.2.3. | 08/21/2026 | LOW | 3.5 | 43.452 |
| CVE-2026-19898 | A vulnerability was found in VictoriaMetrics up to 1.146.0. Impacted is the function requestHandler of the file app/vmauth/main.go of the component VMAuth Authentication Endpoint. Performing a manipulation results in improper restriction of excessive authentication attempts. The attack is possible to be carried out remotely. The complexity of an attack is rather high. The exploitability is considered difficult. The exploit has been made public and could be used. Upgrading to version 1.147.0 is recommended to address this issue. The patch is named 119ba0fb5be8024d50c5ba946599b2e69e8803ea. Upgrading the affected component is recommended. | 08/15/2026 | LOW | 2.9 | 41.67 |
| CVE-2026-19895 | A vulnerability was detected in opensourcepos Open Source Point of Sale up to 3.4.2. This affects the function Login::index of the file app/Config/Filters.php of the component Login Endpoint. The manipulation results in improper restriction of excessive authentication attempts. The attack may be launched remotely. The attack requires a high level of complexity. It is indicated that the exploitability is difficult. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet. | 08/15/2026 | LOW | 2.9 | 41.658 |
| CVE-2026-76884 | ERF file parser crash in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of service | 08/19/2026 | LOW | 3.1 | 34.258 |
| CVE-2026-76885 | Tektronix K12xx file parser crash in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of service | 08/19/2026 | LOW | 3.1 | 34.258 |
| CVE-2026-76887 | Crash in the Wireshark dissection engine in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of service | 08/19/2026 | LOW | 3.1 | 34.258 |
| CVE-2026-76888 | RDP protocol dissector crash in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of service | 08/19/2026 | LOW | 3.1 | 34.258 |
| CVE-2026-76890 | Crash in sharkd in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of service | 08/19/2026 | LOW | 3.1 | 34.258 |
| CVE-2026-76891 | Crash in sharkd in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of service | 08/19/2026 | LOW | 3.1 | 34.258 |
| CVE-2026-76926 | BUSMASTER file parser abnormal exit in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of service | 08/19/2026 | LOW | 3.1 | 34.258 |
| CVE-2026-19897 | A vulnerability has been found in mangroup dtale up to 3.22.0. This issue affects the function Login of the file dtale/auth.py of the component Login Endpoint. Such manipulation leads to improper restriction of excessive authentication attempts. The attack can be executed remotely. This attack is characterized by high complexity. The exploitability is assessed as difficult. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet. | 08/15/2026 | LOW | 2.9 | 33.67 |
| CVE-2026-19896 | A flaw has been found in mangroup dtale up to 3.22.0. This vulnerability affects the function build_secret_key of the file dtale/app.py of the component Flask Session Cookie. This manipulation causes insufficiently random values. Remote exploitation of the attack is possible. The attack's complexity is rated as high. It is stated that the exploitability is difficult. The exploit has been published and may be used. The pull request to fix this issue awaits acceptance. | 08/15/2026 | LOW | 2.9 | 33.664 |
| CVE-2026-19934 | A vulnerability has been found in itsourcecode Hospital Management System 1.0. This impacts an unknown function of the file /vieworder.php. The manipulation of the argument delid leads to sql injection. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. | 08/16/2026 | LOW | 2.1 | 31.3 |
| CVE-2026-19932 | A security flaw has been discovered in DefaultFuction Notice-System-Managent 2.0. This issue affects the function GroovyShell.evaluate of the file /execute of the component NoticeController. The manipulation results in code injection. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks. The project confirms, that "it’s being processed". | 08/16/2026 | LOW | 2.1 | 31.294 |
| CVE-2026-19933 | A weakness has been identified in DefaultFuction Customer-Relationship-Management-In-C-Project 2.0. Impacted is the function gets of the component Customer Search Module. This manipulation causes stack-based buffer overflow. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks. The project confirms, that "it’s being processed". | 08/16/2026 | LOW | 2.1 | 31.294 |
| CVE-2026-76800 | A flaw has been found in DeDeCMS 3. Affected by this vulnerability is an unknown functionality of the file /include/dialog/select_media_post.php. Executing a manipulation of the argument uploadfile can lead to unrestricted upload. The attack can be executed remotely. The exploit has been published and may be used. | 08/20/2026 | LOW | 2.1 | 31.282 |
| CVE-2026-76785 | A security flaw has been discovered in amirsanni Mini-Inventory-and-Sales-Management-System 0.1. Affected is the function Transaction::getAll of the file application/models/Transaction.php. Performing a manipulation of the argument orderBy/orderFormat results in sql injection. It is possible to initiate the attack remotely. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. | 08/20/2026 | LOW | 2.1 | 31.27 |
| CVE-2026-19904 | A vulnerability was found in SourceCodester Online Book Store System 1.0. This vulnerability affects unknown code of the file /admin/index.php?page=site_settings of the component System Settings Module. The manipulation results in cross site scripting. The attack can be executed remotely. The exploit has been made public and could be used. | 08/15/2026 | LOW | 1.9 | 30.681 |
| CVE-2026-77781 | Tie::Hash::Regex versions before 2.0.0 for Perl will throw an exception on unparseable lookup keys. The FETCH, EXISTS and DELETE methods throw an exception when on malformed regular expressions. Each method falls back to a regex match when the key is not already stored in the hash, compiling the caller's key with a bare qr// and no eval guard. A key that is not a valid regular expression pattern, such as a single unmatched bracket, dies. An application that looks up externally supplied strings in a tied hash will die on an invalid key. | 08/22/2026 | UNKNOWN | — | 27.964 |
| CVE-2026-14187 | The Tutor LMS WordPress plugin before 4.0.6 does not enforce per-object ownership checks on its course content type, allowing any user with the instructor role to read the content of private courses belonging to other instructors. | 08/22/2026 | UNKNOWN | — | 20 |
| CVE-2026-16260 | The Post Grid, Slider & Carousel Ultimate WordPress plugin before 1.8.1 does not sanitise and escape one of its custom post type settings before outputting it in an HTML attribute on the admin edit screen, allowing users with the Contributor role and above to inject JavaScript that executes in the session of any administrator who opens the affected item. | 08/22/2026 | UNKNOWN | — | 20 |
| CVE-2026-16612 | The FiboSearch WordPress plugin before 1.34.1 does not consistently exclude password-protected products from its unauthenticated AJAX endpoints, allowing unauthenticated users to disclose and enumerate password-protected products and their metadata without entering the product password. Two endpoints are affected: the autocomplete search endpoint (dgwt_wcas_ajax_search) and the Details Panel endpoint (dgwt_wcas_result_details) when queried for taxonomy details. | 08/22/2026 | UNKNOWN | — | 20 |
| CVE-2026-16738 | The Conekta Payment Gateway WordPress plugin before 6.2.2 does not verify the authenticity of incoming payment gateway webhook notifications, nor bind the confirmed payment to the targeted order or verify its amount, allowing unauthenticated attackers to mark arbitrary orders as paid without payment. | 08/22/2026 | UNKNOWN | — | 20 |
| CVE-2026-18052 | The ManageWP Worker WordPress plugin before 4.9.37 does not bind the account being logged in to the signature which authorises the login, nor prevent an already used login link from being replayed, allowing attackers who obtain such a link to gain a session as any user on the site, including an administrator. | 08/22/2026 | UNKNOWN | — | 20 |
| CVE-2026-19093 | The Tutor LMS WordPress plugin before 4.0.6 does not validate a stored file path before using it to stream media, allowing users with the instructor role to read arbitrary files on the server, including files outside the web root. The readable files include the WordPress configuration file, which exposes the database credentials and the authentication keys and salts, so authentication cookies can be forged. | 08/22/2026 | UNKNOWN | — | 20 |
| CVE-2026-19221 | The Forminator Forms WordPress plugin before 1.57.0.5 does not restrict a network-wide setting to network administrators, allowing an administrator of any single site on a multisite network to execute arbitrary code across the entire network. | 08/22/2026 | UNKNOWN | — | 20 |
| CVE-2026-19222 | The Forminator Forms WordPress plugin before 1.57.0.7 does not consistently enforce the role restriction it applies to registration forms, allowing users who are permitted to build forms to configure one that assigns the administrator role to any visitor who registers through it. | 08/22/2026 | UNKNOWN | — | 20 |
| CVE-2026-76789 | The Slider Hero with Video Background, Animation WordPress plugin before 9.1.3 does not have authorisation and nonce checks on two of its request handlers, and does not escape a stored setting before outputting it, allowing unauthenticated users to store malicious JavaScript which will be executed in the context of an administrator viewing the Slider Hero with Video Background, Animation WordPress plugin before 9.1.3's admin area, as well as any visitor of a page embedding a slider. | 08/22/2026 | UNKNOWN | — | 20 |
| CVE-2026-76793 | The Firebase Authentication WordPress plugin before 1.7.1 does not require the email address in an authentication token to be verified before matching it to a WordPress account and issuing a session, allowing unauthenticated attackers to log in as any user, including administrators. | 08/22/2026 | UNKNOWN | — | 20 |
| CVE-2026-77000 | The WP Social Media Login WordPress plugin through 1.0.6 does not verify that a social login was actually completed with the identity provider before authenticating a visitor, allowing unauthenticated attackers to log in as any existing user, including administrators, by supplying that user's email address. | 08/22/2026 | UNKNOWN | — | 20 |
| CVE-2026-77001 | The Social Login & Sharing buttons with Analytics By SoClever WordPress plugin through 1.2.0 does not perform any authentication, authorisation or nonce checks in one of its publicly accessible login handlers, allowing unauthenticated attackers to obtain a valid session as any existing user, including administrators. In the default case a session as the site's original administrator account is obtained without needing to know any account details at all. | 08/22/2026 | UNKNOWN | — | 20 |
| CVE-2026-77002 | The SmilePass Selfie Login WordPress plugin through 1.0.2 does not perform any server-side verification of the identity it is asked to authenticate, allowing unauthenticated users to log in as any registered account, including administrators. | 08/22/2026 | UNKNOWN | — | 20 |
| CVE-2026-13405 | The Royal Addons for Elementor WordPress plugin before 1.7.1066 does not correctly sanitise custom widget markup before writing it to a file that is later executed, allowing users with the manage_options capability (and, on WordPress Multisite, non-super subsite administrators who do not otherwise hold code-execution capabilities) to execute arbitrary PHP code. | 08/20/2026 | UNKNOWN | — | 20 |
| CVE-2026-15049 | The Depicter — Popup & Slider Builder WordPress plugin before 4.8.0 does not validate the type of a file uploaded through its import feature and does not remove a malformed upload, allowing users with editor-level access to write an arbitrary file (including executable PHP) into a web-accessible directory, which can lead to remote code execution. | 08/20/2026 | UNKNOWN | — | 20 |
| CVE-2026-13712 | The Divi WordPress theme before 5.9.0 does not properly escape some of its Social Media Follow module settings before outputting them in link attributes, allowing users with a role as low as contributor to store JavaScript which will run when a higher privileged user, such as an administrator, views the post. | 08/16/2026 | UNKNOWN | — | 20 |
| CVE-2026-15384 | The Manual Image Crop WordPress plugin before 1.15 does not perform any capability check or nonce verification on the authenticated AJAX action that crops attachment images; its only guard passes for any logged-in user. A subscriber-level user can therefore supply an arbitrary attachment ID and overwrite that attachment's generated intermediate-size image (for example its thumbnail) and mutate its stored metadata, regardless of who owns the media. This is a cross-user integrity/defacement issue over the Media Library. The action also has no nonce, so it is additionally susceptible to CSRF. | 08/16/2026 | UNKNOWN | — | 20 |
| CVE-2026-17533 | The All-in-One WP Migration and Backup WordPress plugin before 7.108 does not restrict its migration import functionality to network administrators on multisite installations, allowing an administrator of a single subsite to execute arbitrary PHP code across the entire network. | 08/16/2026 | UNKNOWN | — | 20 |
| CVE-2026-18653 | The WP Directory Kit WordPress plugin before 1.5.7 does not sanitise and escape a parameter before using it in a SQL statement, allowing administrators to perform SQL injection attacks. On a multisite installation this lets an administrator of a single site read data belonging to the entire network, which they are not otherwise able to reach. | 08/16/2026 | UNKNOWN | — | 20 |
| CVE-2026-19613 | The ECS WordPress plugin before 4.3.10 does not perform ownership or post-status checks when one of its dynamic repeater data sources reads custom field values from a user-supplied post identifier, allowing users with a contributor-level account or above to read custom field values and post metadata from posts they do not own, including private and draft ones. | 08/16/2026 | UNKNOWN | — | 20 |
| CVE-2026-19711 | The Premium Packages WordPress plugin before 7.0.7 does not validate a withdrawal request against the requesting user's actual earned balance, allowing any authenticated user, including a subscriber with no sales at all, to submit a payout request for an arbitrary amount, which an administrator may then approve and pay out. | 08/16/2026 | UNKNOWN | — | 20 |
| CVE-2026-19712 | The Masteriyo LMS WordPress plugin before 2.3.3 does not sanitise and escape a quiz field before outputting it back in a page, and grants its instructor role the ability to store unfiltered HTML, allowing such users to perform Stored Cross-Site Scripting attacks against any visitor of the affected page, including administrators. This affects default single-site installations. Sites running multisite, or defining DISALLOW_UNFILTERED_HTML, are not affected as the capability is not granted there. | 08/16/2026 | UNKNOWN | — | 20 |
| CVE-2026-19714 | The Simple JWT Login WordPress plugin before 3.6.8 does not validate the audience of the Google identity tokens it accepts, allowing unauthenticated users to authenticate as any user whose email address such a token carries, up to and including an administrator. Every site with the Simple JWT Login WordPress plugin before 3.6.8's Google sign-in enabled is affected. | 08/16/2026 | UNKNOWN | — | 20 |
| CVE-2026-19717 | The CatFolders Document Gallery & PDF Library WordPress plugin before 2.0.7 does not have authorisation checks in some of its REST API endpoints, allowing unauthenticated users to retrieve the title, type, size and URL of the media attachments assigned to any of its folders, including folders which are not published in any gallery on the site. | 08/16/2026 | UNKNOWN | — | 20 |
| CVE-2026-19725 | The WPvivid — Backup, Migration & Staging WordPress plugin before 0.9.131 does not sanitise a value taken from an unauthenticated request before using it to build a log file path, allowing an attacker holding a site to site transfer key to create a log file in any existing writable directory of the site, including the web root. The file name always carries a fixed suffix and the contents are always the WPvivid — Backup, Migration & Staging WordPress plugin before 0.9.131's own log header, so only the location of the file is attacker controlled. | 08/16/2026 | UNKNOWN | — | 20 |
| CVE-2026-19726 | The Visualizer WordPress plugin before 4.0.7 does not properly authorise access to the configuration of its charts, allowing users with the Contributor role and above to read the full configuration of any chart on the site, including charts the Visualizer WordPress plugin before 4.0.7's own interface denies them, and to retrieve every chart's configuration in a single request. The disclosed configuration can include the credentials of a remote data source a chart reads from. | 08/16/2026 | UNKNOWN | — | 20 |
| CVE-2026-19728 | The Extra Product Options Builder for WooCommerce WordPress plugin before 1.2.176 does not verify that the requester is entitled to a customer-uploaded file before serving it, allowing unauthenticated users who obtain a file's stored name to retrieve it. The Extra Product Options Builder for WooCommerce WordPress plugin before 1.2.176 writes a deny-all rule into its upload directories, so the disclosure only crosses a boundary on web servers that honour it, such as Apache. Where it is ignored, as on a default nginx setup, the same files are already served at their direct URL and the endpoint exposes nothing further. | 08/16/2026 | UNKNOWN | — | 20 |
| CVE-2026-75628 | Punk::OAuth2 versions before 0.03 for Perl allow an attacker-chosen off-site redirect after login because same_origin_path accepts a backslash or tab in the return parameter. oauth2_login reads the return parameter from the initiation request, runs same_origin_path over it, and stores the survivor in the session flow record as the post-login redirect target. That check rejects a value that does not begin with a slash, one with a slash as its second byte, and one containing CR or LF. A backslash and a tab pass. The URL Standard treats a backslash as equivalent to a slash for special schemes, so `/\evil.example` parses with the authority `evil.example`. It also strips ASCII tab before parsing, so a tab between two leading slashes leaves `//evil.example`. A crafted link to the application's own login route lands the victim on the attacker's site after a genuine authentication. The redirect carries no authorization code or access token. | 08/20/2026 | UNKNOWN | — | 19.97 |
| CVE-2026-11418 | Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | 08/21/2026 | UNKNOWN | — | 19.958 |
| CVE-2026-11609 | Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | 08/21/2026 | UNKNOWN | — | 19.958 |
| CVE-2026-11615 | Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | 08/21/2026 | UNKNOWN | — | 19.958 |
| CVE-2026-11805 | Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | 08/21/2026 | UNKNOWN | — | 19.958 |
| CVE-2026-73323 | Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | 08/21/2026 | UNKNOWN | — | 19.958 |
| CVE-2026-76069 | Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | 08/21/2026 | UNKNOWN | — | 19.958 |
| CVE-2026-9052 | Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | 08/21/2026 | UNKNOWN | — | 19.958 |
| CVE-2026-18502 | Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | 08/19/2026 | UNKNOWN | — | 19.958 |
| CVE-2026-18862 | Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | 08/19/2026 | UNKNOWN | — | 19.958 |
| CVE-2026-19561 | Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | 08/19/2026 | UNKNOWN | — | 19.958 |
| CVE-2026-19562 | Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | 08/19/2026 | UNKNOWN | — | 19.958 |
| CVE-2026-19563 | Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | 08/19/2026 | UNKNOWN | — | 19.958 |
| CVE-2026-15689 | Dancer2::Plugin::Auth::Extensible versions through 0.713 for Perl allow password reset link poisoning via the request Host header in _default_email_password_reset and _default_welcome_send. Both default emails emit a link of the form `$base/login/$code`, whose authority comes from the request Host header, or from X-Forwarded-Host under behind_proxy (obtained from Dancer2's request->base function). A POST to /login carrying submit_reset and a username needs no authentication: it stores a fresh reset code against that account and mails the account holder a link to a host of the sender's choosing. The welcome mail takes the same path when the application calls create_user with email_welcome set. Through 0.711 the handlers read `request->uri_base` and `request->base` directly; Versions 0.712 and later provide an uri_base configuration key that defaults to the untrusted `request->uri_base` when unset. The default configuration with reset_password_handler enabled and the default message text, a recipient who follows the link hands a working reset code to the sender's host, which is enough to take over the account. | 08/15/2026 | UNKNOWN | — | 19.958 |
| CVE-2026-74546 | In the Linux kernel, the following vulnerability has been resolved: hwmon: (adt7470) Fix divide-by-zero TOCTOU crash in fan speed read If the fan data becomes 0 between the FAN_DATA_VALID() check and the FAN_PERIOD_TO_RPM() conversion, it will result in a divide-by-zero crash due to a race with a concurrent update of the cached fan value. Fix a TOCTOU issue by reading fan data once. | 08/15/2026 | UNKNOWN | — | 19.952 |
| CVE-2026-74547 | In the Linux kernel, the following vulnerability has been resolved: hwmon: (adt7470) Fix busy-loop and I2C flooding in update thread When userspace configures 'auto_update_interval' to 0 via sysfs, the background kthread executes schedule_timeout_interruptible(0), which returns immediately. If 'num_temp_sensors' is concurrently or previously set to 0, the msleep_interruptible() delay inside adt7470_read_temperatures() also becomes 0. This combination forces the background thread into a tight, unbounded busy-loop, hogging the CPU and flooding the I2C bus with a continuous stream of transactions. Fix this vulnerability by raising the lower limit of the clamp_val in auto_update_interval_store() from 0 to 500 milliseconds. This guarantees a reasonable minimum sleep window between sensor updates, protecting the system from intentional or accidental I2C bus denial of service. | 08/15/2026 | UNKNOWN | — | 19.952 |
| CVE-2026-74548 | In the Linux kernel, the following vulnerability has been resolved: forcedeth: fix UAF of txrx_stats in nv_remove nv_remove() frees the per-CPU txrx_stats before unregister_netdev(). Until unregister completes, ndo_get_stats64, the NAPI/xmit data path, and nv_close()/drain may still access txrx_stats, leading to a use-after-free. Free the stats only after unregister_netdev(). | 08/15/2026 | UNKNOWN | — | 19.952 |
| CVE-2026-74549 | In the Linux kernel, the following vulnerability has been resolved: hwmon: (nct6775-core) Prevent access to unsupported weight registers Sashiko reports: During initialization of the nct6116 chip, the driver sets data->pwm_num to 5. However, it assigns several NCT6106 register arrays (such as NCT6106_REG_WEIGHT_DUTY_STEP, NCT6106_REG_WEIGHT_TEMP_SEL, and NCT6106_REG_WEIGHT_TEMP_*) to data->REG_PWM and data->REG_WEIGHT_TEMP. These arrays only contain 3 elements. In nct6775_update_pwm(), the driver iterates up to data->pwm_num. If data->has_pwm has bits 3 or 4 set (which is structurally possible for nct6116), the loop attempts to read elements at index 3 and 4 from these 3-element arrays. This results in a global out-of-bounds read, which can be caught by KASAN. Furthermore, the driver uses these garbage out-of-bounds values as hardware register addresses for subsequent read and write operations. This leads to invalid hardware register access, potentially causing hardware misconfiguration or system crashes. The underlying problem is that the chip does support up to five fan control channels, but only the first three support weight control. Fix the problem by extending the affected weight register arrays with zeroed fields. The driver uses zeroed register addresses to determine if a register is supported or not, and skips accesses for unsupported registers. | 08/15/2026 | UNKNOWN | — | 19.952 |
| CVE-2026-74550 | In the Linux kernel, the following vulnerability has been resolved: net: do not send ICMP/NDISC Redirects when peer allocation fails When inet_getpeer_v4() or inet_getpeer_v6() fails to allocate a peer entry under memory pressure or tree size caps, redirect handlers previously fell back to sending un-rate-limited ICMP/NDISC Redirect messages. In IPv4, ip_rt_send_redirect() called icmp_send() directly when peer == NULL. In IPv6, ip6_forward() and ndisc_send_redirect() passed a NULL peer into inet_peer_xrlim_allow(), which returned true when peer == NULL. Because ICMP/NDISC Redirects are not part of the default global rate limit mask (sysctl_icmp_ratemask), sending redirects when peer == NULL creates an un-rate-limited ICMP packet storm. Fix this by failing closed in ip_rt_send_redirect(), ip6_forward(), and ndisc_send_redirect() when peer is NULL. | 08/15/2026 | UNKNOWN | — | 19.952 |
| CVE-2026-74551 | In the Linux kernel, the following vulnerability has been resolved: hwmon: (nzxt-smart2) DMA-align output buffer Sashiko reports: When send_output_report() calls hid_hw_output_report(), the underlying USB HID core calls usb_interrupt_msg() which maps this buffer directly for DMA. When the DMA mapping flushes or invalidates the cacheline, it will corrupt the adjacent variables (mutex, update_interval) that were modified concurrently by the CPU. This causes memory corruption due to cacheline sharing on non-coherent CPU architectures (such as ARM or MIPS). The DMA API debugging tool (CONFIG_DMA_API_DEBUG) will trigger runtime warnings for this violation. Any operation that triggers send_output_report() (like setting a fan speed or updating the interval) causes the USB DMA mapping. On systems with non-coherent caches, this structural bug causes immediate and deterministic memory corruption. Align the output buffer to ARCH_DMA_MINALIGN to fix the problem. | 08/15/2026 | UNKNOWN | — | 19.952 |
| CVE-2026-74552 | In the Linux kernel, the following vulnerability has been resolved: hwmon: (lm90) Only report alarms if driver is ready Userspace can read sysfs attributes before driver registration is complete, immediately after devm_hwmon_device_register_with_info() has been called. At that time, data->hwmon_dev is not yet initialized. This can trigger a NULL pointer access since lm90_update_device() and with it lm90_update_alarms_locked() will be called. This call schedules report_work and lm90_report_alarms(), which passes the still-NULL data->hwmon_dev to hwmon_notify_event() and triggers a NULL pointer dereference. Fix the problem by only scheduling the report and alert workers data->hwmon_dev is set. | 08/15/2026 | UNKNOWN | — | 19.952 |
| CVE-2026-74553 | In the Linux kernel, the following vulnerability has been resolved: hwmon: (nct6775-core) Fix number of temperature registers for NCT6116 Unlike NCT6106, NCT6116 only has three temperature registers, and with it only three temperature source and temperature source configuration registers. The register addresses match those of NCT6106 and can be re-used. The code used a separate array to list the temperature source registers for NCT6116, but used the size of the NCT6106 register array to set the number of registers. The NCT6106 register array provides six addresses, while the temperature source register array for NCT6116 only provides three addresses. This causes a KASAN report. BUG: KASAN: global-out-of-bounds in nct6775_probe+0x936/0x46f0 [nct6775] Read of size 2 at addr ffffffffc19561a6 by task modprobe/954 ... Call Trace: dump_stack+0x7d/0xa7 print_address_description.constprop.0+0x1c/0x220 ? __kasan_kmalloc.constprop.0+0xc9/0xd0 ? __kmalloc_node_track_caller+0x194/0x5b0 ? nct6775_probe+0x936/0x46f0 [nct6775] ? nct6775_probe+0x936/0x46f0 [nct6775] ... Fix the problem by hard-coding the number of temperature and temperature configuration registers to three for NCT6116. Drop the unnecessary NCT6116_REG_TEMP_SOURCE array and re-use NCT6106_REG_TEMP_SOURCE. | 08/15/2026 | UNKNOWN | — | 19.952 |
| CVE-2026-74554 | In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix out-of-bounds clear_bit in ath12k_mac_dp_peer_cleanup() ath12k_mac_dp_peer_cleanup() clears the ML peer ID slot on the free_ml_peer_id_map bitmap by indexing it with dp_peer->peer_id. That is wrong: dp_peer->peer_id for an MLO peer always carries the ATH12K_PEER_ML_ID_VALID bit (BIT(13)), so clear_bit() is invoked with index >= 0x2000, which is far outside the bitmap of ATH12K_MAX_MLO_PEERS (256) bits and corrupts memory adjacent to ah->free_ml_peer_id_map. The intended bitmap entry also never gets cleared, so subsequent ath12k_peer_ml_alloc() calls eventually run out of IDs. The ID without the VALID bit is what ath12k_peer_ml_alloc() returned and is stored in ahsta->ml_peer_id. Use that instead. While there, also reset ahsta->ml_peer_id to ATH12K_MLO_PEER_ID_INVALID so the bitmap and ahsta->ml_peer_id stay in sync. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 | 08/15/2026 | UNKNOWN | — | 19.952 |
| CVE-2026-74555 | In the Linux kernel, the following vulnerability has been resolved: scsi: libsas: Fix HA resume deadlock and hisi_sas disk-wake race Commit fbefe22811c3 ("scsi: libsas: Don't always drain event workqueue for HA resume") introduced sas_resume_ha_no_sync() to avoid a deadlock: the PHYE_RESUME_TIMEOUT handler, running on the HA event workqueue, calls sas_deform_port() -> sas_destruct_devices(), which removes SCSI devices and waits for the host to become runtime-active. But the host cannot resume until sas_resume_ha() -> sas_drain_work() returns, and the drain is blocked on that very handler. However skipping the drain reintroduces a race: hisi_sas returns from resume before all PHY UP work and libsas discovery work finish. The controller may then autosuspend while disks are still waking up. The disks issue IO to a suspended controller, the IO fails, and the disks get disabled. Fix the deadlock at its source by moving the PHYE_RESUME_TIMEOUT notification to after sas_drain_work(). By then the host resume is about to complete, so device removal through device_link no longer blocks on the resume and the cycle is broken. With the deadlock gone, restore sas_resume_ha() (the draining variant) in hisi_sas and remove sas_resume_ha_no_sync(). The reorder is safe for the other libsas consumers (isci, pm8001, aic94xx, mvsas). During suspend, sas_suspend_devices() calls sas_notify_lldd_dev_gone() for each device, which sets dev->lldd_dev to NULL. When scsi_unblock_requests re-enables I/O in resume, any I/O to a timed-out phy's disk is immediately rejected by the LLDD before reaching hardware: isci returns SAS_DEVICE_UNKNOWN (mapped to DID_BAD_TARGET), and pm8001 returns SAS_PHY_DOWN (mapped to DID_NO_CONNECT). Both complete directly via scsi_done() without entering SCSI EH. This is identical in both the old and new ordering since lldd_dev_gone runs during suspend, before resume. The reorder only affects when the PHYE_RESUME_TIMEOUT handler runs (synchronized by sas_drain_work() vs. asynchronous after resume returns), not whether I/O can reach the device. aic94xx and mvsas do not register any PM ops and never reach this code path. | 08/15/2026 | UNKNOWN | — | 19.952 |
| CVE-2026-74556 | In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi_tcp: Bound SCSI Response data segment to the connection buffer iscsi_tcp_hdr_dissect() receives the data segment of several PDU types into the fixed-size conn->data buffer, which is allocated for ISCSI_DEF_MAX_RECV_SEG_LEN (8192) bytes. For the LOGIN_RSP, TEXT_RSP, REJECT and ASYNC_EVENT opcodes the dissect path already rejects a PDU whose DataSegmentLength exceeds that buffer. The SCSI Command Response (ISCSI_OP_SCSI_CMD_RSP) path also copies its data segment (sense/response data) into conn->data via iscsi_tcp_data_recv_prep(), but it does so without the same check. The only upstream bound on in.datalen is conn->max_recv_dlength, the initiator's advertised MaxRecvDataSegmentLength, which is commonly negotiated well above 8192 (open-iscsi defaults to 262144). A target that returns a SCSI Response with a DataSegmentLength between 8193 and max_recv_dlength therefore overflows the 8192-byte conn->data buffer. Once the same bound applies, ISCSI_OP_SCSI_CMD_RSP is handled exactly like those responses: bound the data segment, receive it into conn->data when present, and otherwise complete the PDU with no data. Fold the opcode into that case group rather than duplicating the check. | 08/15/2026 | UNKNOWN | — | 19.952 |
| CVE-2026-74557 | In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Fix stale-data leak into the SCSI sense buffer iscsi_scsi_cmd_rsp() copies the sense data of a SCSI Response from the target-supplied data segment. The segment carries a 2-byte sense length followed by the sense bytes, so it must hold 2 + senselen bytes, but the bounds check only requires datalen >= senselen: senselen = get_unaligned_be16(data); if (datalen < senselen) goto invalid_datalen; memcpy(sc->sense_buffer, data + 2, min_t(uint16_t, senselen, SCSI_SENSE_BUFFERSIZE)); A target that returns a SCSI Response whose datalen equals senselen (with senselen <= SCSI_SENSE_BUFFERSIZE) makes the memcpy() from data + 2 read up to two bytes past the received data. Those bytes are stale conn->data contents and end up in the command's sense buffer, which is returned to userspace. Account for the 2-byte sense length prefix in the check. | 08/15/2026 | UNKNOWN | — | 19.952 |
| CVE-2026-74558 | In the Linux kernel, the following vulnerability has been resolved: xsk: reclaim invalid Tx descriptors in ZC batch path The zero-copy Tx batch parser stops when it encounters an invalid descriptor. If this happens after one or more continuation descriptors, the Tx consumer can be advanced past fragments that are neither submitted to the driver nor returned to userspace through the completion ring. A similar problem occurs when a packet exceeds xdp_zc_max_segs. The descriptors consumed up to the limit are released without completion, and the remaining continuation descriptors can subsequently be interpreted as the beginning of another packet. Parse Tx batches in packet units and distinguish descriptors belonging to complete valid packets from descriptors consumed while draining an invalid or oversized packet. Return the former to the driver and append the latter to the CQ address area so userspace can reclaim their UMEM frames. Treat a standalone invalid descriptor as a one-descriptor reclaim-only packet. Advancing the Tx-ring consumer releases the ring slot, but does not by itself return ownership of the referenced UMEM frame to userspace. Once draining starts, continue until the packet's end-of-packet descriptor is consumed. Preserve the drain state on the socket when EOP has not yet been supplied, so draining can continue during a later call. Leave incomplete but otherwise valid packets on the Tx ring. Shared-UMEM pools using multi-buffer Tx also need packet-framed parsing. Walk their Tx sockets one packet at a time, preserving the existing per-socket fairness scheme, instead of using the legacy one-descriptor fallback. Keep that fallback for shared pools that do not use multi-buffer Tx. Since the drain state is maintained per socket and both the singular and shared paths can resume an interrupted drain, changing the socket list from singular to shared requires no special bind-time transition. CQ entries are positional, and drivers may complete only part of the Tx work returned by xsk_tx_peek_release_desc_batch(). Therefore, reclaim-only entries cannot be published immediately when earlier driver-visible descriptors are still outstanding. Track the number of driver-visible CQ entries preceding the reclaim entries. Let xsk_tx_completed() publish partial hardware Tx completions, and publish the reclaim entries only after every earlier Tx descriptor has completed. Complete a reclaim-only batch immediately when there is no driver-visible work in front of it, and prevent another Tx batch from being appended while reclaim entries remain pending. Also cap batch processing by the size of the pool's temporary descriptor array, as Tx rings belonging to sockets sharing a UMEM may have different sizes. This ensures that every invalid Tx descriptor consumed by the ZC batch path is either submitted to the driver as part of a valid packet or returned to userspace without violating CQ completion ordering. | 08/15/2026 | UNKNOWN | — | 19.952 |
| CVE-2026-74559 | In the Linux kernel, the following vulnerability has been resolved: xsk: drain continuation descs after overflow in xsk_build_skb() Fix generic xmit path multi-buffer logic when packets are either too big (count of descriptors exceed MAX_SKB_FRAGS) or an invalid descriptor is included in fragmented packet. Introduce xdp_sock::drain_cont and act upon this flag - when it is set, keep on consuming descriptors from AF_XDP Tx ring and put them directly onto Cq. Previously these descriptors were silently lost and could never be reached again. | 08/15/2026 | UNKNOWN | — | 19.952 |
| CVE-2026-74560 | In the Linux kernel, the following vulnerability has been resolved: xsk: fix buffer leak in xsk_drop_skb() for AF_XDP multi-buffer Tx This patch is inspired by the check[1] from sashiko. It says when overflow happens, the address of cq to be published is invalid. Actually the severer thing is the whole process of publishing the address of cq in this particular case is not right: it should truely publish the address and advance the cached_prod in cq as long as it reads descriptors from txq. The following is the full analysis. xsk_drop_skb() is called in three places, which all discard a partially built multi-buffer skb: 1) xsk_build_skb() -EOVERFLOW error path: packet exceeds MAX_SKB_FRAGS 2) __xsk_generic_xmit() post-loop cleanup: an invalid descriptor in the TX ring prevents the partial packet from completing 3) xsk_release(): socket close while xs->skb holds an incomplete packet In all three cases, the TX descriptors for the already-processed frags have been consumed from the TX ring (xskq_cons_release), and CQ slots have been reserved. However, xsk_drop_skb() calls xsk_consume_skb() which cancels the CQ reservations via xsk_cq_cancel_locked(). Since the buffer addresses never appear in the completion queue, userspace permanently loses track of these buffers. Fix this by letting consume_skb() trigger the existing xsk_destruct_skb destructor, which already submits buffer addresses to the CQ via xsk_cq_submit_addr_locked(). Note that cancelling the descriptors back to the TX ring (via xskq_cons_cancel_n) is not a appropriate option because an oversized packet that always exceeds MAX_SKB_FRAGS would be retried indefinitely, which is an obviously deadlock bug in the TX path. Also move the desc->addr assignment in xsk_build_skb() above the overflow check so that the current descriptor's address is recorded before a potential -EOVERFLOW jump to free_err, consistent with the zerocopy path in xsk_build_skb_zerocopy(). [1]: https://lore.kernel.org/all/[email protected]/ | 08/15/2026 | UNKNOWN | — | 19.952 |
| CVE-2026-74561 | In the Linux kernel, the following vulnerability has been resolved: nexthop: avoid unlocked f6i_list walk in nh_rt_cache_flush nh_rt_cache_flush() walks nh->f6i_list during an RTNL-serialized nexthop replace without holding nh->lock, racing the unlocked IPv6 route add/delete that mutate the list under nh->lock and free fib6_info entries (nh_rt_cache_flush() is inlined into rtm_new_nexthop()): BUG: KASAN: slab-use-after-free in nh_rt_cache_flush (net/ipv4/nexthop.c:2243) Read of size 8 at addr ffff888012953e18 by task exploit/146 nh_rt_cache_flush (net/ipv4/nexthop.c:2243) replace_nexthop (net/ipv4/nexthop.c:2610) rtm_new_nexthop (net/ipv4/nexthop.c:3323) rtnetlink_rcv_msg (net/core/rtnetlink.c:7076) Unlike the other f6i_list walks, this one bumps each route's sernum via fib6_update_sernum_upto_root(), which needs tb6_lock; taking nh->lock around it would invert the established tb6_lock -> nh->lock order and deadlock. As the only purpose is to invalidate cached dsts, bump the IPv6 sernum for the whole netns with rt_genid_bump_ipv6() instead, mirroring the rt_cache_flush() already done for IPv4 just above. | 08/15/2026 | UNKNOWN | — | 19.952 |
| CVE-2026-74562 | In the Linux kernel, the following vulnerability has been resolved: nexthop: take nh->lock for f6i_list walks in replace check and notify fib6_check_nh_list() and __nexthop_replace_notify() walk nh->f6i_list during an RTNL-serialized nexthop replace without holding nh->lock. IPv6 RTM_NEWROUTE/RTM_DELROUTE run without RTNL and mutate that list under nh->lock (fib6_add_rt2node_nh(), fib6_purge_rt()), so both walks race a concurrent route delete that unlinks and frees a fib6_info: BUG: KASAN: slab-use-after-free in rt6_fill_node.isra.0 (net/ipv6/route.c:5799) Read of size 4 at addr ffff888014607e64 by task exploit/143 rt6_fill_node.isra.0 (net/ipv6/route.c:5799) fib6_rt_update (net/ipv6/route.c:6412) __nexthop_replace_notify (net/ipv4/nexthop.c:2542) rtm_new_nexthop (net/ipv4/nexthop.c:2554) rtnetlink_rcv_msg (net/core/rtnetlink.c:7076) BUG: KASAN: slab-use-after-free in fib6_check_nh_list (net/ipv4/nexthop.c:1605) Read of size 8 at addr ffff888014a7d068 by task exploit/142 fib6_check_nh_list (net/ipv4/nexthop.c:1605) rtm_new_nexthop (net/ipv4/nexthop.c:2575) rtnetlink_rcv_msg (net/core/rtnetlink.c:7076) Both walks only read the entries and take no tb6_lock, so protect them with nh->lock; fib6_rt_update() uses gfp_any(), which returns GFP_ATOMIC under the lock. | 08/15/2026 | UNKNOWN | — | 19.952 |
| CVE-2026-74563 | In the Linux kernel, the following vulnerability has been resolved: rds: tcp: hold the RCU lock across ipv6_chk_addr() in rds_tcp_laddr_check() rds_tcp_laddr_check() looks up a scoped IPv6 interface with dev_get_by_index_rcu(), drops the RCU read-side lock, and only then passes the bare struct net_device * into ipv6_chk_addr(). dev_get_by_index_rcu() only keeps the device alive within the same RCU read-side section. After rcu_read_unlock(), a concurrent RTM_DELLINK can free the net_device; ipv6_chk_addr() then dereferences the stale pointer in __ipv6_chk_addr_and_flags() (e.g. l3mdev_master_dev_rcu(dev)), reading freed memory. Keep the RCU read-side lock held across the ipv6_chk_addr() call instead of dropping it right after the lookup, so the device cannot be freed while it is in use. BUG: KASAN: slab-use-after-free in __ipv6_chk_addr_and_flags (... net/ipv6/addrconf.c:1998) Read of size 8 at addr ffff8880106ec000 by task exploit/153 Call Trace: ... kasan_report (mm/kasan/report.c:595) __ipv6_chk_addr_and_flags (... net/ipv6/addrconf.c:1998) ipv6_chk_addr (net/ipv6/addrconf.c:2031 net/ipv6/addrconf.c:1972) rds_tcp_laddr_check (net/rds/tcp.c:370) rds_bind (net/rds/bind.c:248) __sys_bind (net/socket.c:1920) __x64_sys_bind (net/socket.c:1956) do_syscall_64 (arch/x86/entry/syscall_64.c:63) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) | 08/15/2026 | UNKNOWN | — | 19.952 |
| CVE-2026-74564 | In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_hashlimit: validate hashtable supports XT_HASHLIMIT_RATE_MATCH The XT_HASHLIMIT_RATE_MATCH flag mode changes the semantics of the dsthash_ent structure which represents an entry in the hashtable. There is a union area which uses a different layout to express the rate match mode. Update .checkentry path to validate the XT_HASHLIMIT_RATE_MATCH mode flag is requested by two or more different rules that refer to the same hashtable. Otherwise, uninitialized access to the burst field in the union is possible. Reject the use of the XT_HASHLIMIT_RATE_MATCH mode flag if set on by revision less than 3 too. | 08/15/2026 | UNKNOWN | — | 19.952 |
| CVE-2026-74565 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: make nft_object rhltable per table The nft_object rhltable is global, this allows for accessing objects that are being dismangled from lookup path by other existing netns. Given the nft_obj_destroy() releases the object inmediately, this might lead to use-after-free of these objects that are being released. Make the existing rhltable per table to address this issue to deal with with the nft_rcv_nl_event() path too. Update nft_obj_lookup() to take the table as non-const, otherwise, compiler complains when passing the objname_ht to rhltable_lookup(). | 08/15/2026 | UNKNOWN | — | 19.952 |
| CVE-2026-74566 | In the Linux kernel, the following vulnerability has been resolved: keys: make keyring key-chunk byte order agree with keyring_diff_objects() keyring_get_key_chunk() loads description bytes into the index chunk low address first, while keyring_diff_objects() numbers the first differing bit from the low end and folds the absolute byte index into the level without removing the inline-prefix offset the level already carries. The two disagree on byte order and bit position, so the array can be told two keys first differ at a bit that does not differ in the chunk the walker uses, letting crafted descriptions collide into one node. Load the chunk in the order keyring_diff_objects() assumes and drop the inline-prefix length when folding the byte index into the level. This only changes the in-memory ordering used to place keys within a keyring; add, search and read of non-colliding keys are unaffected. | 08/15/2026 | UNKNOWN | — | 19.952 |
| CVE-2026-74567 | In the Linux kernel, the following vulnerability has been resolved: keys: fix out-of-bounds read in keyring_get_key_chunk() For description-level chunks keyring_get_key_chunk() advances the read pointer by level * sizeof(long) past the inline prefix but only bounds-checks the prefix, so a long enough key description is read past its kmemdup(desc, desc_len + 1) allocation. Compute the full byte offset and bounds-check the description against it before reading. The walk only reaches a description-level chunk when two keys collide through the hash, x, type and domain_tag chunks, so this is reached from an unprivileged add_key(2) with a crafted pair of same-type keys whose index hashes collide; KASAN reports a slab-out-of-bounds read. | 08/15/2026 | UNKNOWN | — | 19.952 |
| CVE-2026-74568 | In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic: Fix race between LPI release and re-registration Fix a potential race between decrementing an LPI's reference count and evicting that structure from the LPI xarray. LPI structures are maintained in the VGIC LPI xarray (dist->lpi_xa). When the reference count of an LPI structure drops to zero, vgic_release_lpi_locked() removes the structure from the xarray and frees it under the xarray lock. However, the release of an LPI can race with a concurrent LPI re-registration with the same INTID via vgic_add_lpi() on another CPU, since the reference count drop and the xarray eviction are not performed in a single atomic step. This can happen e.g. if the guest issues a DISCARD while the LPI is still referenced from a vCPU's active-pending list (ap_list), and the same INTID is re-mapped via MAPTI. Particularly, vgic_release_lpi_locked() is called from two distinct paths: direct release via vgic_put_irq(), and deferred release via vgic_release_deleted_lpis(). During direct release, the issue can result in deleting a newly registered LPI from the xarray: CPU0 (Releasing LPI) CPU1 (Adding new LPI) ==================== ===================== vgic_put_irq() __vgic_put_irq() refcount_dec_and_test() vgic_add_lpi() xa_lock_irqsave() old_irq = xa_load(.., intid) vgic_try_get_irq_ref(old_irq) == false new IRQ inserted --> __xa_store(.., intid, ..) xa_unlock_irqrestore() xa_lock_irqsave(); vgic_release_lpi_locked() __xa_erase(.., irq->intid) <-- BUG: new IRQ is erased kfree_rcu(old_irq) During the deferred release path, the old IRQ can be leaked: CPU0 (Releasing LPI) CPU1 (Adding new LPI) ==================== ===================== vgic_put_irq_norelease() __vgic_put_irq() refcount_dec_and_test() irq->pending_release = true vgic_add_lpi() xa_lock_irqsave() old_irq = xa_load(.., intid) vgic_try_get_irq_ref(oldirq) == false BUG: old IRQ overwritten --> __xa_store(.., intid, ..) xa_unlock_irqrestore() vgic_release_deleted_lpis() xa_lock_irqsave() xa_for_each() { .. } <-- old IRQ with pending_release = true is gone, so it cannot be released To fix the direct release path, move the reference count drop inside the xarray lock, making sure that vgic_add_lpi() never encounters the to-be-released LPI. In the deferred release path, the refcount drop must happen under a raw spinlock, so the xarray lock cannot be grabbed, and the same solution does not work. Instead, update vgic_add_lpi(), so that if it evicts an LPI from the xarray, it takes on the responsibility of freeing it. Consequently, an LPI may now be freed concurrently after a deferred release drops the refcount, so accessing the pending_release field is no longer safe from use-after-free. Delete all uses of the flag, and update vgic_release_deleted_lpis() to identify orphaned LPIs purely based on their refcount. | 08/15/2026 | UNKNOWN | — | 19.952 |
| CVE-2026-74569 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_sip: widen NAT rewrite delta to s32 in sip_help_tcp() sip_help_tcp() stores the size change of each NAT-rewritten SIP message in s16 diff and accumulates it in s16 tdiff, but a single message can grow by more than S16_MAX while the packet stays under the 65535 enlarge_skb() limit: nf_nat_sip() rewrites every matching URI, and a long Contact list expands the message by tens of kilobytes. diff then wraps, and "datalen = datalen + diff - msglen" yields a huge unsigned datalen, so the next iteration's ct_sip_get_header() reads past the linearized skb tail. Widen diff, tdiff and the seq_adjust hook to s32. Both are bounded by the 65535 byte packet limit, and the seqadj core is already s32 (nf_ct_seqadj_set() takes s32), so no previously accepted input is rejected. BUG: KASAN: use-after-free in ct_sip_get_header (net/netfilter/nf_conntrack_sip.c:464) Read of size 1 at addr ffff888010800000 by task ksoftirqd/1/25 ct_sip_get_header (net/netfilter/nf_conntrack_sip.c:464) sip_help_tcp (net/netfilter/nf_conntrack_sip.c:1694) nf_confirm (net/netfilter/nf_conntrack_proto.c:183) nf_hook_slow (net/netfilter/core.c:619) ip6_output (net/ipv6/ip6_output.c:246) ip6_forward (net/ipv6/ip6_output.c:690) ipv6_rcv (net/ipv6/ip6_input.c:351) __netif_receive_skb_one_core (net/core/dev.c:6212) process_backlog (net/core/dev.c:6676) __napi_poll (net/core/dev.c:7735) net_rx_action (net/core/dev.c:7955) handle_softirqs (kernel/softirq.c:622) run_ksoftirqd (kernel/softirq.c:1076) ... | 08/15/2026 | UNKNOWN | — | 19.952 |
| CVE-2026-74570 | In the Linux kernel, the following vulnerability has been resolved: ntfs: harden runlist realloc size calculations Add a shared helper to safely convert runlist element counts to byte sizes using overflow checks, and use it in both ntfs_rl_realloc() and ntfs_rl_realloc_nofail(). | 08/15/2026 | UNKNOWN | — | 19.952 |
| CVE-2026-74571 | In the Linux kernel, the following vulnerability has been resolved: btrfs: skip global block reserve accounting for rescue mounts [BUG] Mounting with rescue=ibadroots after corrupting the block group tree root triggers a NULL pointer dereference: BUG: kernel NULL pointer dereference, address: 0000000000000100 RIP: 0010:btrfs_update_global_block_rsv+0x9d/0x1c0 [btrfs] Call Trace: fill_dummy_bgs+0xd4/0x120 [btrfs] open_ctree+0xc6e/0x1ca0 [btrfs] btrfs_get_tree+0x50d/0xa40 [btrfs] The same crash occurs with a corrupted raid stripe tree root, via btrfs_read_block_groups() instead of fill_dummy_bgs(). [CAUSE] With rescue=ibadroots, btrfs_read_roots() allows the mount to continue when either root cannot be read, leaving the corresponding root pointer NULL while its on-disk feature bit remains set. btrfs_update_global_block_rsv() then dereferences the missing root based on the feature bit alone. [FIX] Rescue mounts are fully read-only and cannot start transactions, so the global reserve is never consumed. Under btrfs_is_full_ro(), mark the reserve as full and return before performing the accounting. And since we need to check if the fs is mount fully RO, export fs_is_full_ro() as btrfs_is_full_ro(), and move it to fs.h. [ Squash the fs_is_full_ro() export commit into this one. ] | 08/15/2026 | UNKNOWN | — | 19.952 |
| CVE-2026-74572 | In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: fix deadlock between metadata writeback and transaction commit When writing out metadata extent buffers in a zoned filesystem, btree_writepages() holds fs_info->zoned_meta_io_lock across the whole writeback loop, including the call to btrfs_check_meta_write_pointer() -> check_bg_is_active(). For the tree-log block group, check_bg_is_active() may fail to activate the zone and fall back to btrfs_zone_finish_one_bg() to free an active zone. That path waits for the running transaction to commit while still holding zoned_meta_io_lock, but the committer needs that same lock to write out the tree extents, so the two tasks deadlock: Task A (kworker, metadata writeback) Task B (fsstress, transaction commit) ------------------------------------ ------------------------------------- wb_workfn() btrfs_commit_transaction(T) btree_writepages() btrfs_write_and_wait_transaction() btrfs_zoned_meta_io_lock() btrfs_write_marked_extents() btrfs_check_meta_write_pointer() btree_writepages() check_bg_is_active() [treelog_bg] btrfs_zoned_meta_io_lock() btrfs_zone_finish_one_bg() <blocks on zoned_meta_io_lock, btrfs_zone_finish() held by Task A> do_zone_finish() btrfs_inc_block_group_ro() btrfs_wait_for_commit() <blocks waiting for commit of transaction T, done by Task B> The sibling branch in check_bg_is_active() already drops zoned_meta_io_lock around do_zone_finish() for this exact reason. Do the same in the tree-log branch: release the lock around btrfs_zone_finish_one_bg() and re-acquire it afterwards. The lock only protects fs_info->active_{meta,system}_bg, which this branch does not touch, and ctx->zoned_bg keeps a reference to the block group across the unlock, so nothing is lost while the lock is dropped. This hang occasionally reproduces with fstests generic/475 on a zoned btrfs filesystem. | 08/15/2026 | UNKNOWN | — | 19.952 |
| CVE-2026-74573 | In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-v3-iommufd: Require exactly one Stream ID for a vDEVICE arm_vsmmu_vsid_to_sid() maps a guest's vSID to a single physical Stream ID taken from master->streams[0], assuming a device has exactly one stream. A device with several streams gets only its first one mapped, so a guest vSID invalidation cannot reach the others' ATC and IOTLB entries; a device with none makes master->streams a ZERO_SIZE_PTR, read out of bounds. Add an arm_vsmmu_vdevice_init() op to reject the vDEVICE with -EOPNOTSUPP when master->num_streams is not one, rather than mapping it silently. | 08/15/2026 | UNKNOWN | — | 19.952 |
| CVE-2026-74574 | In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: fix fdev setup failure cleanup in idxd_cdev_open() The failed_dev_add and failed_dev_name paths drop the file-device reference while wq->wq_lock is still held. If put_device(fdev) drops the last reference, idxd_file_dev_release() runs synchronously and tries to take wq->wq_lock again, deadlocking. Those paths also fall through into the later ctx cleanup labels even though idxd_file_dev_release() owns that cleanup and frees ctx. This can make idxd_xa_pasid_remove(ctx) and kfree(ctx) operate on a freed context. Move idxd_wq_get() before file-device setup can fail, since the release callback always calls idxd_wq_put(). Then unlock wq->wq_lock before put_device(fdev) and return directly from the file-device setup failure path, leaving ctx cleanup to the release callback. | 08/15/2026 | UNKNOWN | — | 19.952 |
| CVE-2026-74575 | In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Prevent XDomain delayed work use-after-free on disconnect tb_xdp_handle_request() runs on system_wq and queues xd->state_work via queue_delayed_work() in three request handlers: PROPERTIES_CHANGED_REQUEST, UUID_REQUEST (via start_handshake), and LINK_STATE_CHANGE_REQUEST. Similarly, update_xdomain() queues xd->properties_changed_work when local properties change. Concurrently, tb_xdomain_remove() calls stop_handshake() which does cancel_delayed_work_sync() on both delayed works. Later, tb_xdomain_unregister() calls device_unregister() which eventually frees the xdomain. Since commit 559c1e1e0134 ("thunderbolt: Run tb_xdp_handle_request() in system workqueue") moved the request handler off tb->wq, the handler and the remove path are no longer serialized. If queue_delayed_work() executes after cancel_delayed_work_sync() but before the xdomain is freed, the delayed work fires on a freed object. Add xd->removing that tb_xdomain_remove() sets under xd->lock before calling stop_handshake(). Each external queue site holds the same lock and checks removing before calling queue_delayed_work(). This provides the mutual exclusion needed: either the queue site acquires the lock first and queues work that the subsequent cancel will see, or the remove path acquires the lock first and the queue site observes removing == true and skips the queue. | 08/15/2026 | UNKNOWN | — | 19.952 |
| CVE-2026-74576 | In the Linux kernel, the following vulnerability has been resolved: mm/slab: prevent unbounded recursion in free path with new kmalloc type Commit 280ea9c3154b ("mm/slab: avoid allocating slabobj_ext array from its own slab") avoided recursive allocation of obj_exts from kmalloc caches of the same size, by bumping the obj_exts array's allocation size whenever the array size equals the size of the object being allocated. However, as reported by Danielle Costantino and Shakeel Butt, even slabs from kmalloc caches of different sizes can form a cycle by allocating obj_exts arrays from each other [1]: What happened: a KMALLOC_NORMAL slab's obj_exts array (used by allocation profiling / memcg accounting) is itself kmalloc()'d from a KMALLOC_NORMAL cache, so the "slab holds another slab's obj_exts array" relation can form cycles. With sizeof(struct slabobj_ext) == 16 and the host's geometry: - kmalloc-512 has 64 objects/slab -> array is 64*16 == 1024 bytes, served from kmalloc-1k; - kmalloc-1k has 32 objects/slab -> array is 32*16 == 512 bytes, served from kmalloc-512. A kmalloc-512 slab and a kmalloc-1k slab therefore hold each other's obj_exts array. Discarding one frees the other's array, which empties and discards that slab, which frees the first's array, and so on: __free_slab() -> free_slab_obj_exts() -> kfree() -> discard_slab() -> __free_slab() recurses along the cycle until the stack is exhausted. With memory allocation profiling, this allows unbounded recursion in the free path and led to a stack overflow on a production host in the Meta fleet [1]: BUG: TASK stack guard page was hit Oops: stack guard page RIP: 0010:kfree+0x8/0x5d0 Call Trace: __free_slab+0x66/0xc0 kfree+0x3f0/0x5d0 ... ( ~125x __free_slab <-> kfree ) ... <kernel driver freeing a resource> do_syscall_64 It is proposed [1] to resolve this issue by always serving the obj_exts array allocation from kmalloc caches (or large kmalloc) of sizes larger than the object size. However, as pointed out by Vlastimil Babka [2], this can waste an excessive amount of memory as slabs from large kmalloc sizes (e.g. kmalloc-8k) generally need obj_exts arrays much smaller than the object size. Therefore, rather than bumping the size, let us take a different approach; disallow formation of cycles between kmalloc types when allocating obj_exts arrays. Currently, all obj_exts arrays are served from normal kmalloc caches. Cycles cannot be created if obj_exts arrays of normal kmalloc caches are served from a special kmalloc type that can never have obj_exts arrays. To achieve this, create a new kmalloc type called KMALLOC_NO_OBJ_EXT. KMALLOC_NO_OBJ_EXT caches are created with SLAB_NO_OBJ_EXT flag when either 1) memory allocation profiling is not permanently disabled, or 2) kmalloc types with a priority higher than KMALLOC_CGROUP are aliased with KMALLOC_NORMAL. Sheaf bootstrapping for KMALLOC_NO_OBJ_EXT caches now must be deferred because allocation of a barn can trigger obj_exts array allocation of normal kmalloc caches when the KMALLOC_NO_OBJ_EXT cache for that size is not ready yet. For simplicity, perform bootstrapping of sheaves for all kmalloc caches later. Introduce a new slab alloc flag, SLAB_ALLOC_NO_OBJ_EXT, to prevent allocation of obj_exts arrays, and let kmalloc_slab() override the type to KMALLOC_NO_OBJ_EXT when specified. Note that kmalloc_type() remains unchanged because kmalloc_flags() bypasses the kmalloc fastpath. Do not pass SLAB_ALLOC_NO_RECURSE to kmalloc_flags() in alloc_slab_obj_exts() and instead use SLAB_ALLOC_NO_OBJ_EXT only when the objects are allocated from normal kmalloc caches. While this prevents unbounded recursive allocation of obj_exts, it allows KMALLOC_NO_OBJ_EXT caches to have sheaves. Since sheaf allocations specify SLAB_ALLOC_NO_RECURSE that prevents allocation of both sheaves and obj_exts arrays, the recursion depth is bounded. obj_exts arrays for non- ---truncated--- | 08/15/2026 | UNKNOWN | — | 19.952 |
| CVE-2026-74577 | In the Linux kernel, the following vulnerability has been resolved: net: mpls: initialize rtm_tos in mpls_getroute() mpls_getroute() builds the RTM_NEWROUTE reply to an RTM_GETROUTE request by filling a struct rtmsg allocated from an skb whose data area is not zeroed (alloc_skb(NLMSG_GOODSIZE, ...)). It sets every field of the header except rtm_tos: r = nlmsg_data(nlh); r->rtm_family = AF_MPLS; r->rtm_dst_len = 20; r->rtm_src_len = 0; r->rtm_table = RT_TABLE_MAIN; r->rtm_type = RTN_UNICAST; r->rtm_scope = RT_SCOPE_UNIVERSE; r->rtm_protocol = rt->rt_protocol; r->rtm_flags = 0; struct rtmsg has no padding, so the one uninitialised byte rtm_tos (offset 3) is copied straight to user space on recvmsg(), leaking a byte of uninitialised heap memory. This is in contrast to mpls_dump_route(), which fills the very same header and does set rtm_tos = 0. Initialize rtm_tos to 0, matching mpls_dump_route(). Reproduced with KMSAN by adding an MPLS route and issuing a non-RTM_F_FIB_MATCH RTM_GETROUTE for its label: BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x36c/0x33f0 _copy_to_iter+0x36c/0x33f0 __skb_datagram_iter+0x196/0x12c0 skb_copy_datagram_iter+0x5b/0x210 netlink_recvmsg+0x37b/0xef0 ... Uninit was created at: __alloc_skb+0x8ca/0x10e0 mpls_getroute+0x1280/0x3a40 rtnetlink_rcv_msg+0x1138/0x15a0 ... Byte 19 of 64 is uninitialized (byte 19 = nlmsghdr(16) + rtmsg offset 3 = rtm_tos) | 08/15/2026 | UNKNOWN | — | 19.952 |